380-6 Dremel Multi-Tool - Overview

This replacement power cord is supplied form original equipment manufacturer. It is specially made for Dremel rotary multi-tools. I plays a key role by delivering the electricity from the outlet to the tool. This cord is rubber insulated and it is sold individually. It does include a rubber grommet/sleeve. To complete this repair you wo...Read moreuld need a screwdriver. • Remove housing screws • Remove the housing • Disconnect wires from the old cord • Remove old cord • Secure the new power cord in place • Reattach wires • Reassemble and test the unit

This is an authentic Dremel replacement part that is designed for Dremel rotary multi-tools. In conjunction with armature its the central component of an electric motor that drives the unit. A field is usually damaged by overloading the power tool or it can be caused by a faulty armature. It is highly recommended to replace both carbon brushes when replacing a field. This durable metal item is sold individually.

This part is an OEM from Dremel. Constructed of plastic, this cover is compatible with several rotary tools. The cover is fastened onto the armature, providing protection to the related components. This item is sold individually, and a hex key is often needed for the replacement.

This is a genuine Dremel replacement part that has been sourced from the original manufacturer to be used with multi-tools. The switch assembly is used to relay electricity from the power cord to the motor. This item may require a screwdriver, small pick, small nose pliers, and a utility knife to install. The switch is sold individually.

An authentic OEM sourced item that is supplied for use with Dremel power tools. This special ring helps to provide a seal for the armature, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable rubber and is sold i...Read morendividually, over time the material may wear out and begin to crack eventually requiring a replacement.

This item has been sourced from the original manufacturer to be used with rotating multi-tools from Dremel. The durable plastic cap is used to cover and support the carbon brushes. The cap allows you to access the brushes without having to disassemble the motor housing. This item is sold as a pair.

This is an authentic OEM part. The Dremel cover is made for use with the 300 (F013030000) Corded Multi-Tool. This plastic component is fitted in the housing, protecting the lock. The cover is sold individually. No tools should be needed as the cover can be snapped into place.

Original OEM replacement Armature Assembly used on some Dremel Corded Multi-Tools. This item includes an Armature, Fan, Armature Bearing, Commutator End Bearing, and the fan with pulley. Remember to be especially careful of the armature fan when you remove it, because if you break it, you will have to replace the entire armature. Due to c...Read moreonstant contact with Carbon Brushes armature will eventually wear out and would need to be replaced. It is highly recommended to replace both Carbon Brushes when replacing an armature.

• A slim, aluminum tube that provides the optimal grip for holding a bit in a Dremel rotary tool. • The collet features small identification rings around its shank. These rings correspond with the size of the collet: 0 rings = 1/8", 3 rings = 3/32", 2 rings = 1/16", 1 ring = 1/32" • Collets are compatible with 225 Flex-Shaft attachment....Read more • For use with all rotary tools except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models 260, 270 and 280.