EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3779 - Overview

Models starting with 3779

Click on the best match to narrow your results.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: 321-10
$6.55
In Stock
Screw
★★★★★
★★★★★
(1)
Part #321-10
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw and is sold individually. This is an OEM part sourced directly from the manufacturer.
Nut-lock, Ni – Part Number: 3296-42
$6.55
In Stock
Nut-lock, Ni
Part #3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.
Screw-torx – Part Number: 120-7950
$6.55
In Stock
Screw-torx
Part #120-7950
This is an authentic replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers from Toro and Lawn Boy. The shoulder screw is commonly used to secure the side fenders to the mower's frame assembly. This bolt is sold as an individual replacement part.
Washer – Part Number: 107-3844
$6.55
In Stock
Washer
Part #107-3844
A washer is used for things such as load distribution, stability, alignment and protection for whatever equipment it is fastened between. This curved washer, also known as a wave washer or spring washer, is made of metal and features a curved design that allows for applications in settings where objects being fastened together are also curved or to exert a continuous level of tension. This washer measures approximately 1-inch in outer diameter and 1/3-inch inner-diameter and is compatible with and used on equipment like snowblowers, chainsaws and lawnmowers. This washer is installed between a round fastener or knob to better secure them together and if you notice that where the washer is normally connected is loose or vibrates excessively, this washer likely needs replacing. Depending on your model the replacement process may appear different, but it is just as simple as placing the washer between two things that are connected and securing them tightly.
Screw-hwh – Part Number: 46-8091
$6.55
In Stock
Screw-hwh
Part #46-8091
This screw is an OEM part sourced directly from the manufacturer and is used in Toro snowthrowers. It requires a wrench and connects the ring-chute to the chute-discharge. The screw is made of metal and is sold as an individual part. Screws will need to be replaced when they become stripped.
Nut-lock, Ni – Part Number: 3296-29
$6.55
In Stock
Nut-lock, Ni
Part #3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.
Nut-lock, Ni – Part Number: 3296-56
$6.55
In Stock
Nut-lock, Ni
Part #3296-56
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
Bearing-ball – Part Number: 38-7820
$21.48
In Stock
Bearing-ball
Part #38-7820
This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively play or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.
Screw-hwh – Part Number: 32144-4
$6.55
In Stock
Screw-hwh
Part #32144-4
This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.
Cover – Part Number: 120-7159
$125.03
In Stock
Cover
Part #120-7159
This upper housing cover is designed to protect the internal components of your snowblower, helping maintain reliable performance in demanding winter conditions. Built for durability, it forms a strong outer barrier that shields critical parts from debris, moisture, and wear. Ideal for replacing a cracked or damaged cover, it helps restore the structural integrity of your machine and supports consistent, dependable operation.
Nut-flange, Ni – Part Number: 104-8301
$6.52
In Stock
Nut-flange, Ni
Part #104-8301
This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this high-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.
Screw-carr – Part Number: 3230-18
$6.55
In Stock
Screw-carr
Part #3230-18

Exact Part matches for your search term

Ass
No Longer Available
Ass'y. Frame-Front
This part number matches the current model number 3779
Part #3779
Inlet Needle – Part Number: 3779
No Longer Available
Inlet Needle
This part number matches the current model number 3779
Part #3779
Collet – Part Number: 3779
No Longer Available
Collet
This part number matches the current model number 3779
Part #3779
BURNER – Part Number: 3779
$467.34
Special Order
BURNER
This part number matches the current model number 3779
Part #3779