This replacement bottom plate is designed to fit select outdoor propane grills and provides stable support for the propane tank at the base of the grill frame. Constructed from coated sheet metal for durability, it resists wear from heat, moisture, and outdoor exposure. The plate includes mounting hardware for secure attachment to the rea...Read morer and side panels (sold separately). Over time, the original plate may warp or rust, compromising safety and stability—making replacement essential for maintaining your grill’s performance.
When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting...Read more points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.
An authentic replacement handle that is supplied from original equipment manufacturer for use with Weber grills. It is a high quality item that provide user with a comfortable grip for the lid. Please note one durable stainless steel handle with the hardware to secure it is included per order.
Genuine Manufacturer Sourced replacement part designed for Weber Grills. Igniter produces the spark to ignite the burner. Includes the 2-pole spark generator, collector box with electrode, push button cap, wire retainer and a battery. Replacing this electronic ignition module is easy and does not require any tools • Unplug the wires ...Read morefrom the old ignition module • Remove old igniter and replace it with a new one from the kit • Unscrew the button that holds module to the unit • Secure new module in place • Install a "AAA" battery and secure the module with the button • Connect the wires and test the unit
This is an authentic Weber replacement part, sourced from the original manufacturer for use with outdoor gas grills. This metal panel is used to cover the rear of the stand or frame. The hardware used to mount the rear panel is included, please see model diagram for associative parts.
This replacement ignition module is specially produced for Weber grills. It is a genuine part that is supplied directly from original equipment manufacturer. The purpose of an ignition module is to supply the spark to ignite the burner. This ignition module includes a mounting bracket, the push button and the "AAA" battery. Replacing th...Read moreis module is a simple task that does not require any tools. • Unplug the wires from the old module • Unscrew the push button • Place a new module in place • Install a the battery • Secure the push button • Connect the wires and test the unit
This authentic Weber part is made for the Summit, Genesis, and Spirit models of grills. This ignition button does not require tools for installation; simply press it into place on the Ignition Module (part # 81315). This button is included with the Ignition Module Assembly.
This genuine OEM repair kit is used with Weber grills. This is a four-part assembly that includes two posts and two retaining clips. The posts are designed to hold the lid to the body of the grill while still allowing it to move freely like a hinge.
This is a genuine Weber part used with the Genesis, Summit, and Spirit grills. Each pack includes two hinge bolts and two nuts; each pack has the hardware for one door. The top pin of the screws fit into pre-drilled holes in the frame of the front doors. They are held onto the doors with the provided bolts.
It is a genuine weber hardware which is supplied directly from the original equipment manufacturer for use with gas grills. These replacement screws are used to secure the burner tubes. It is a high-quality hardware which is sold in a pack of three.
This genuine OEM Weber part is sold individually. If the magnets are rusted or damaged they will not keep the doors shut and would need to be replaced. To prevent your frame or magnets from rusting it is recommended to always cover your grill after use and store in in a dry environment.