EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3729 - Overview

Models starting with 3729

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Run Capacitor – Part Number: WR55X24064
$61.39
In Stock
Run Capacitor
★★★★★
★★★★★
(7)
Part #WR55X24064
Support steady compressor operation with this refrigerator run capacitor. It provides the electrical phase shift needed for the compressor motor to run properly as the cooling system operates. A failing capacitor may contribute to humming, difficulty starting, interrupted compressor operation, or rising compartment temperatures. Visible swelling, leaking, or burned terminals may also indicate damage. Unplug the refrigerator before accessing the component. Capacitors can retain an electrical charge after power is disconnected, so follow approved discharge procedures and avoid touching or shorting the terminals. Record the wire positions before replacement. This is an OEM part sourced directly from the manufacturer.
Light Socket – Part Number: WR2X9391
$23.16
In Stock
Light Socket
★★★★★
★★★★★
(19)
Part #WR2X9391
This part is a replacement light socket for your refrigerator. It connects to the power source, and holds the light bulb. If the light in your refrigerator is not working, you could have a faulty socket. It is important to determine if the light bulb is simply burned out, or if the socket is causing the issue. Be sure to disconnect your refrigerator from the power source before you begin this repair. This socket is black in color and is sold individually. This is an OEM part sourced directly from the manufacturer.
Refrigerator Defrost Timer – Part Number: WR9X483
$41.70
In Stock
Refrigerator Defrost Timer
★★★★★
★★★★★
(1)
Part #WR9X483
This refrigerator defrost timer will cycle for thirty minutes after every ten hours of run time.
Relay PTCR - 3 Wire – Part Number: WR07X10055
No Longer Available
Relay PTCR - 3 Wire
★★★★★
★★★★★
(3)
Part #WR07X10055
Also known as the Start Relay. The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Lawn Mower Zone Control Cable – Part Number: 946-1130
$21.45
Special Order
Lawn Mower Zone Control Cable
★★★★★
★★★★★
(2)
Part #946-1130
This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety. This specific part features a 40-inch covered housing with a total cable length of 53 inches, including 13 inches of exposed cable. It is sold individually and includes all necessary components for straightforward replacement. Please note that part number 946-1137 features a fully covered cable with a length of 53 inches. To ensure proper fit and function, carefully compare your existing cable before ordering.
Screw - #10 – Part Number: WE2M174
$19.50
In Stock
Bell Blade Support – Part Number: 736-0524B-1
$6.40
In Stock
Bell Blade Support
Part #736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you may hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.
RETAINER – Part Number: WB2X1082
No Longer Available
RETAINER
Part #WB2X1082
Spring Lever: Front Wheel – Part Number: 94832
$16.99
In Stock
Spring Lever: Front Wheel
★★★★★
★★★★★
(1)
Part #94832
The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, and is rated as "easy" to install by our customers. If broken or damaged (likely due to general wear over time) you will no longer be able to move it to make adjustments, and the part should be replaced. This black, plastic part is sold individually. Refer to your make, model and diagrams to ensure this part fits your machine.
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter) – Part Number: 710-1044
$6.40
In Stock
Screw, 3/8-24 x 1.50 (w/25mm Blade Adapter)
Part #710-1044
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.
Lawn Mower Lower Handle – Part Number: 749-0928A-0637
$48.32
In Stock
Lawn Mower Lower Handle
Part #749-0928A-0637
This is the lower handle for various models of walk-behind lawn mowers. This handle is made of durable black metal and attaches directly to the rear of the lawn mower. This handle is an OEM part that is sold by itself and does not come with any hardware or other parts. If your current lower lawn mower handle is corroded or damaged, it needs to be replaced immediately so you can properly and safely handle your lawn mower. This handle measures approximately 24.5-inches long and 17-inches wide and connects the rear of the lawn mower with the upper and main handle that the user holds when operating the lawn mower. Replacing this handle will not require any tools but must start with turning off the lawn mower. Loosen and remove the knobs around the handle, including the ones connecting the lower handle to the mower and those securing the upper and lower handles. Once each knob is removed, replace the old lower handle with the new one, and resecure • all the knobs onto the handle(s).
CLIP – Part Number: WR2X8583
$15.00
Special Order
CLIP
Part #WR2X8583

Exact Part matches for your search term

O D FAN MTR – Part Number: 3729
No Longer Available
O D FAN MTR
This part number matches the current model number 3729
Part #3729
Wheel – Part Number: 3729
No Longer Available
Wheel
This part number matches the current model number 3729
Part #3729
SUCTION WALL – Part Number: 3729
$297.09
Special Order
SUCTION WALL
This part number matches the current model number 3729
Part #3729
KIT 4 GRIDS 44X35 – Part Number: 3729
$110.51
Special Order
KIT 4 GRIDS 44X35
This part number matches the current model number 3729
Part #3729

Common Symptoms of models starting with 3729

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No power to the fan and compressor
222 of 302 people found this instruction helpful.
  • Christian from Kearneysville, WV
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I have a fridge in my garage. I have found that a glass of ice water or a cold drink outside is very important to me. When I discovered melting ice dripping onto the garage floor I was very upset. I spun the fridge and found that the compressor and fan weren't starting. I got out my multi-meter and discovered that power was not makin g it to these components. I did some research and found the wiring diagram online. There really isn't too much going on with a fridge and the most likely candidate seemed to be the run capacitor. I ordered the part, replaced it in a few minutes and the fridge began working again.
Was this helpful?
Thank you for voting!
bad light socket
45 of 56 people found this instruction helpful.
  • nancy from silsbee, TX
  • Really Easy
  • Less than 15 mins
unplugged refrigerator. removed light bulb from old socket. unsnapped old light socket and pulled it out just enough to diconnect the electrical plug that plugs into the socket . discarded the old socket and plugged in new socket. snapped in new socket into refrigerator. i watched how to do this simple procedure on you tube and decided to do it myself. easy easy easy
Was this helpful?
Thank you for voting!
Relay
42 of 54 people found this instruction helpful.
  • John H from Austin, TX
  • Really Easy
  • 15 - 30 mins
Removed back panel. Opened cover to relay attached to the compressor and pulled off replacing with new relay. No problem.

Better than paying $250 for someone else to do it.
Was this helpful?
Thank you for voting!