3706400 Murray Lawn Mower - Overview

This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longe...Read morer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

This OEM Washer (j.39-2.2 11G Fl), is a silver, metal part, requiring a wrench or socket set to install. Installation is rated as "Easy". This washer can be used as a spacer between the bottom of the blade and the blade bolt. It attaches on the blade bolt to support the blade. If broken due to fatigue/damage, you may hear a rattling sound...Read more underneath the cutting deck and should replace the part. Refer to your make, model and diagrams to check if this model is right for you.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This 5/16-inch?18 wing nut secures a removable or adjustable part on select lawn and garden equipment. Its winged shape allows it to be tightened and removed by hand. Use the full equipment model number to guarantee the proper fit and location. Check the stud and washer for damaged threads or wear before installation. Start the nut by hand and tighten it firmly, but do not use pliers or overtighten it.

This Washer (.40.81 16g Flt) is a black, metal part, requiring a socket set to install. Installation is rated as "Easy". This washer can be used to provide a tight fit between connected components. It attaches onto the bell crank between the adjusting nut and cotter pin. Refer to your make, model and diagrams to check if this model is right for you.

Authentic OEM approved replacement item commonly used on Murray walk behind lawn mowers. The purpose of this special bolt is to secure upper and lower mower handles together. The square area under bolts head allows it to stay secure while the lock nut/knob is being tightened. This metal bolt is sold individually.

This is a genuine replacement part sourced directly from the manufacturer. The single blade is commonly found in Murray lawnmowers. This part is made of metal, and is used as the active grass cutting element. You will require a wrench when replacing this item. The single blade is sold as an individual replacement part.

This is the special bolt-hex which is utilized to secure the mower blade. It is an identical replacement for the hardware that was installed on a new equipment. Check the owner\'s manual and the parts diagrams for your specific model to ensure the correct replacement procedure. This high-quality bolt-hex is made of durable metal and is so...Read moreld as an individual item. It is supplied by the original manufacturer for Murray and Snapper lawn mowers. Note, a wrench will be needed to secure or remove it.

This is a genuine replacement part sourced directly from the manufacturer. The stop lever is commonly found on Murray lawn mowers. This part is made of metal, and is used to indicate the presence of a user, allowing the engine to run. You may require a screwdriver when replacing this part. This item is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with lawn tractors, snowthrowers, utility carts, and grass baggers. The special nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. This nut is available as an individual replacement part.

Chute deflector 22