This is a genuine Black and Decker replacement part, it is sold individually. It is made of plastic. The purpose of the 241381-01 Blade Insulator is to keep the 092715-00 spacer from coming in contact with the blade and to eliminate vibration.
This wheel push ring secures the wheel firmly onto the axle, helping keep it in place during operation. Made from durable metal, it provides a reliable hold to prevent the wheel from slipping or coming loose. Replacing a worn or missing push ring helps restore safe and stable mower performance.
Length 8 Foot
Length: 6'
Gauge: 18
Wires: 2
Type: Bare Wire
This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Makita power tools. A cracked or damaged cord should be replaced before continuing to use the tool. This rubber insulated cord is sold individ...Read moreually. It comes with a rubber sleeve grommet that is not sold separately.
Replacing this power supply cord you will need a screwdriver.
• Remove the housing screws
• Remove the the housing
• Disconnect the old cord wires
• Remove the old power cord
• Secure the new cord in place
• Connect the wires
• Reassemble and test the new cord
Dewalt genuine replacement part, that is sold individually. 2 are needed for the tools listed below. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a mot...Read moreor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
This is an authentic manufacturer made replacement part which is specially designed for use with Craftsman lawn mowers. The knob assembly attaches the upper handle to the lower handle. This part is made of plastic and is sold individually. For installation, you will need a screwdriver and an adjustable wrench set to aid you.
This cooling fan and debris guard helps protect your lawn mower’s motor by circulating air to prevent overheating while directing grass and debris away from internal components. Made from durable plastic, it supports efficient operation and reduces buildup under the mower deck. Replacing a worn or damaged fan can help restore proper cooling and improve overall mower performance.
Genuine Black and Decker replacement part, this item is sold individually. This part is placed underneath the Hex Nut that holds the blade to the shaft on the mowers shown below. It helps secure the blade to the shaft assembly on the mower.
This is a genuine Black and Decker replacement part, it is sold individually.
This is the part of the mower that turns the motor on and off.
It is actuated by pulling on the switch lever.
It has four terminals on the back for slide on spade connectors.
This is a genuine manufacturer sourced replacement wheel. It is specially designed for use with walk-behind/push lawn mowers. This is the drive wheel that allows mower to move. This part consists of a plastic tire and a plastic rim. This assembly includes one (1) wheel. To replace this part you would need a wrench. • Make sure the uni...Read moret is unplugged • First you want to remove the bolt that holds the wheel • This will allow you to separate the wheel and remove it • Align the new wheel with the gears • Secure the wheel using the bolt
This motor assembly on your lawn mower is responsible for driving the blades to cut grass. If the motor malfunctions, the blades may struggle to cut grass or not spin at all. Additionally, you may experience overheating, grinding, squealing, or rattling noises. Neglecting to replace the motor will result in excessive stress on the mower, ...Read moreleading to breakdowns and expensive repairs. To remove the existing motor, gather a screwdriver, nut driver, and adjustable wrench. Ensure the machine is turned off and wait for the blade to come to a complete stop. Flip the machine over and secure the blade with a 2 by 4 to prevent movement. Remember to wear protective gloves while handling the blade. Remove any spacers or washers, and then detach the blade. Proceed to remove the mower shroud and disconnect any wires and brushes connected to the motor. Finally, remove the old motor from the machine. This replacement part is sourced directly from the original equipment manufacturer and is sold individually.
This is a Genuine Manufacturer Approved replacement Spacer for a Blade used on certain Black and Decker Lawn Mowers. It is made out of Metal and is Sold Individually. This Spacer sits on top of the Fan and it allows it to spin freely and with less friction.
This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn mowers. The rear skirt attaches to the mower deck to protect your feet and legs from debris. This part is made of hard plastic and is sold individually. For this repair, you will need a screwdriver and a socket wrench.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
DOA
12 of 18 peoplefound this instruction helpful.
Le from BIGGSVILLE, IL
Really Easy
30 - 60 mins
Screw drivers
Did shorts test on motor, continuity tests on switch and rectifier. Found dead rectifier, ordered same, Installed Now OK
Was this helpful?
Thank you for voting!
Fan broke.
1 personfound this instruction helpful.
Steven from Port Angeles, WA
Really Easy
Less than 15 mins
Socket set
Removed bolt holding lawnmower blade and took out washer, spacer, blade and fan. Cleaned up underside of mower then replaced fan, blade, new insulator, washer and bolt.
Old power cord frayed at the grommet entering the drill casing
4 of 13 peoplefound this instruction helpful.
Bruce from HILLSBORO, OR
Very Difficult
30 - 60 mins
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198 Email sent (11/16/2023) to partselect.com has gone unanswered Thanks?