365L Cub Cadet Lawn Mower - Overview

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

The flange sleeve bearing, also known just as the bearing, is sold individually, and assists the tine shaft rotation on your tiller by reducing friction between the moving parts and securing their positioning. Because of this function, this part can wear easily and requires regular replacement. This part is OEM, black in color and made of...Read more metal. If the shaft becomes loose within the tiller housing, and you notice noise coming from it, it is likely that you need to replace this bearing. Most customers rated this as a moderately easy repair, which requires a screwdriver, pliers, a socket set, wrench driver, and nutdriver.

This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of this partis rated as Medium difficulty by customers. It attaches inside the cylinder head, and is installed by tightening the rocker nut on...Read more top to manufacturer specs. This part opens and closes the intake and exhaust valves, and if broken there will be poor engine performance as well as an internal knocking or tapping sound from the engine. If damaged, likely due to fatigue or stress, it must be replaced. Refer to your owners manual or model number to ensure you are slecting the correct part.

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

It is an OEM item which is made for use with Kawasaki engines commonly installed on lawn and garden equipment. This gasket provides an air-tight seal between the case-rocker and the cylinder head. Over time the material will wear out and it may begin to crack eventually requiring a replacement to ensure engines proper performance. To ensu...Read morere the correct installation of the new part, refer to the specific diagrams of your model. It is a high-quality gasket which is made of durable composite material and is sold as an individual component. You will need a wrench to remove and resecure the hardware that holds the cylinder head.

This is a genuine OEM replacement part used with many 4 stroke engines. The Kawasaki gasket secures the float to the float chamber. This rubber component is sold individually. A wrench, pair of pliers and a screwdriver are needed for the removal and replacement.

It is a genuine manufacturer-approved replacement gasket which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. This gasket provides an air-tight seal for the exhaust pipe, over time gaskets tend to wear out and may begin to crack eventually requiring a replacement. It is a high-quality component which is made of durable composite material and is sold individually.

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This is an authentic replacement part that has been OEM sourced to be used with riding lawnmowers from MTD, Yard Machines, Bolens, and Yard-Man. The lug nut is used to secure the mower\\\'s wheel assembly. A hex socket wrench is needed to replace this item. The lug nut is sold individually.

This authentic replacement part is designed for use with Makita reciprocating saws. The bearing-plane helps to reduce friction between rotating parts. Unfortunately, over time it will wear out and may begin to fail eventually requiring a replacement. Make sure to refer to the appropriate diagrams for your model for the exact location and ...Read morethe correct application of this component. Note, this high-quality bearing-plane is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

This replacement oil seal is an authentic OEM sourced item, it is not an aftermarket imitation. It is commonly utilized on Kawasaki engines. This item fits the crankcase to provide an air tight seal preventing any leaks. Please note, this rubber item is sold individually. You will need a wrench set to complete this repair.