Models > 3643312593

3643312593 Kenmore Range - Overview

Sections of the 3643312593

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Gas Pressure Regulator – Part Number: WB19T10078
Gas Pressure Regulator
★★★★★
★★★★★
(2)
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane. This valve automatically cuts off the flow of gas at a certain pressure.
$54.42
  In Stock
Order within the next 4 hrs and your part ships today!
Large Burner Drip Bowl – Part Number: WB31M11
Large Burner Drip Bowl
★★★★★
★★★★★
(1)
PartSelect #: PS244366
Manufacturer #: WB31M11
This part is sold individually. It is white on the top side, and black underneath. Used for gas ranges. You may need to order the drip bowl seal.
  No Longer Available
Ignition Spark Switch - Rear Burners – Part Number: WB24K5083
Ignition Spark Switch - Rear Burners
★★★★★
★★★★★
(1)
PartSelect #: PS236639
Manufacturer #: WB24K5083
$26.53
  In Stock
Order within the next 4 hrs and your part ships today!
Small Burner Drip Bowl – Part Number: WB31M10
Small Burner Drip Bowl
PartSelect #: PS244365
Manufacturer #: WB31M10
This part is sold individually. It is white on the top side, and black underneath.
  No Longer Available
Ignition Valve Switch - Front Burners – Part Number: WB24K5078
Ignition Valve Switch - Front Burners
PartSelect #: PS236635
Manufacturer #: WB24K5078
$37.42
  In Stock
Order within the next 4 hrs and your part ships today!
BURN BOWL BL PORC – Part Number: WB31M8
BURN BOWL BL PORC
★★★★★
★★★★★
(1)
PartSelect #: PS244383
Manufacturer #: WB31M8
  No Longer Available
Control Seal – Part Number: WB32K5035
Control Seal
PartSelect #: PS244566
Manufacturer #: WB32K5035
$14.71
  Special Order
BRNR BOWL BL PORC – Part Number: WB31M7
BRNR BOWL BL PORC
PartSelect #: PS244382
Manufacturer #: WB31M7
$14.29
  Special Order
Burner Cap - Large – Part Number: WB13K5049
Burner Cap - Large
PartSelect #: PS231308
Manufacturer #: WB13K5049
  No Longer Available
Burner Cap - Small - Gray – Part Number: WB13K5048
Burner Cap - Small - Gray
PartSelect #: PS231307
Manufacturer #: WB13K5048
$53.07
  Special Order
Burner Cap - Small – Part Number: WB13K5050
Burner Cap - Small
PartSelect #: PS231309
Manufacturer #: WB13K5050
  No Longer Available
CONTROL SEAL-WHITE – Part Number: WB32K5034
CONTROL SEAL-WHITE
PartSelect #: PS244565
Manufacturer #: WB32K5034
  No Longer Available

Questions And Answers for 3643312593

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 3643312593

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Failed ignition switch
took me a a while to find my problem. One burner would not spark to ignite gas burner. From Part Select website I noticed the part that was the problem from the parts diagram. I did not realize it was related to ignition until I saw that. Easy and cheap to fix after that.
Parts Used:
Ignition Valve Switch - Front Burners
  • wally from lake oswego, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
6 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large and small Burner Drip Bowls needed to be replaced
The drip bowls of my stove had to be replaced. The tough job about this is that the bowls need to be ordered which we did. The order was sent to my house within a couple days. The drip bowls were replaced and they look and work just fine. The gas stove is about 10 yrs old and it needs the parts special ordered now. I used to wash and use a bit of elbow grease but this time it required too much effort. So an easy replacement did the trick.
Parts Used:
Large Burner Drip Bowl Small Burner Drip Bowl
  • Nelda from Carmichael, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not light
replaced switch
Parts Used:
Ignition Spark Switch - Rear Burners
  • Jimiego from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
7 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!