Models > 36371542211

36371542211 Kenmore Washer Dryer Combo - Overview

Sections of the 36371542211

[Viewing 12 of 12]
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White – Part Number: WE1M504
Drum Bearing Slide - White
★★★★★
★★★★★
(155)
PartSelect #: PS755842
Manufacturer #: WE1M504
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$17.00
  In Stock
Drum Bearing Slide - Green – Part Number: WE1M1067
Drum Bearing Slide - Green
★★★★★
★★★★★
(27)
PartSelect #: PS6447706
Manufacturer #: WE1M1067
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
$11.49
  In Stock
Front Drum Bearing – Part Number: WE3M26
Front Drum Bearing
★★★★★
★★★★★
(74)
PartSelect #: PS960316
Manufacturer #: WE3M26
This Front Drum Bearing (Top Bearing, Dryer Drum Front Support Bearing, Drum Support Bearing, Dryer Drum Glide Bearing) holds the drum bearing and slides for the drum to turn on. The front drum bearin...
$59.76
  In Stock
BELT DRIVE – Part Number: WE03X29897
BELT DRIVE
★★★★★
★★★★★
(141)
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$32.97
  In Stock
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(14)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$12.87
  In Stock
Push-to-Start Switch – Part Number: WE4M416
Push-to-Start Switch
★★★★★
★★★★★
(23)
PartSelect #: PS3487190
Manufacturer #: WE4M416
This switch is used to activate the dryer.
$31.57
  In Stock
Cycling Thermostat - 4 Wire – Part Number: WE4M181
Cycling Thermostat - 4 Wire
★★★★★
★★★★★
(8)
PartSelect #: PS267926
Manufacturer #: WE4M181
This thermostat helps to regulate the dryer's internal temperature. L210-30F
$58.38
  In Stock
Door Strike – Part Number: WE1X1192
Door Strike
★★★★★
★★★★★
(7)
PartSelect #: PS266893
Manufacturer #: WE1X1192
The door strike for your dryer is mounted on the dryer door. It fits into the door latch and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not on...
$8.63
  In Stock
Door Switch – Part Number: WE4M415
Door Switch
★★★★★
★★★★★
(5)
PartSelect #: PS2344321
Manufacturer #: WE4M415
A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.
$28.72
  In Stock
TOP BEARING ASSEMBLY 27 Inch – Part Number: WE03X27679
TOP BEARING ASSEMBLY 27 Inch
PartSelect #: PS12703118
Manufacturer #: WE03X27679
Note: The drum slides should also be replaced when your replacing the drum bearing. Slides are NOT included. This part helps your dryer operate as quietly as possible.
$24.52
  In Stock
IGNITER – Part Number: WE04X25996
IGNITER
★★★★★
★★★★★
(3)
PartSelect #: PS12342916
Manufacturer #: WE04X25996
NOTE: Be very careful to not handle the igniter by its gray part as it's very fragile. Hold it by its white tip only.
$48.08
  In Stock
High Limit Thermostat - L315-65 – Part Number: WE4M137
High Limit Thermostat - L315-65
★★★★★
★★★★★
(6)
PartSelect #: PS267900
Manufacturer #: WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to ...
$86.48
  In Stock

Questions And Answers for 36371542211

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 36371542211

[Viewing 14 of 14]
Noisy
Fixed by
these parts
Show All
Will not tumble
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Marks left on clothes
Fixed by
these parts
Show All
No heat or not enough heat
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Takes too long to dry
Fixed by
these parts
Show All
Shuts off too soon
Fixed by
these parts
Show All
Leaking
Fixed by
these parts
Show All
Too hot
Fixed by
these parts
Show All
Will not shut off
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Lid or door won’t close
Fixed by
these parts
Show All
Touchpad does not respond
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
Parts Used:
BELT DRIVE
  • Adrian from Middletown, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
161 of 217 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would get very hot and then turn off
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
Parts Used:
Cycling Thermostat - 4 Wire
  • David from Auburn, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
268 of 552 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer drum turned ok, but the gas heat did not start.
First I found and watched three videos on how to open the dryer and replace the igniter.
Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown.
I got on-line and ordered the new parts from PartsSelect in the afternoon and had them in my hands the next morning by 9:30 am.
I installed the new parts and everything worked fine again. You must be very careful with the igniter to not touch it with hands or anything else. I practiced puting in the old parts first.
Parts Used:
IGNITER Heat Detector
  • Gary L. from Freeport, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
109 of 149 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!