Models > 36370942000

36370942000 Kenmore Refrigerator - Overview

Sections of the 36370942000

[Viewing 7 of 7]

Manuals & Care Guides for 36370942000

Click to download
Keep searches simple, eg. "belt" or "pump".
Ice Maker – Part Number: WR30X10093
Ice Maker
★★★★★
★★★★★
(75)
PartSelect #: PS1993870
Manufacturer #: WR30X10093
This 10 by 5 inch ice maker (Electromechanical Icemaker Kit, Ice Maker Assembly) produces ice. This particular model will produce seven crescent shaped cubes every cycle. It is constructed of plastic ...
$262.05
  In Stock
Evaporator/Condensor Fan Grommet – Part Number: WR02X10098
Evaporator/Condensor Fan Grommet
★★★★★
★★★★★
(11)
PartSelect #: PS284555
Manufacturer #: WR02X10098
This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic a...
$8.63
  In Stock
Single Outlet Valve Kit – Part Number: WR57X10033
Single Outlet Valve Kit
★★★★★
★★★★★
(21)
PartSelect #: PS304375
Manufacturer #: WR57X10033
The water inlet valve on your refrigerator allows water to enter the ice maker and water dispenser. If your ice maker or water dispenser is not functioning properly, or you notice a leak, you may need...
$60.79
  In Stock
Light Switch – Part Number: WR23X10725
Light Switch
★★★★★
★★★★★
(55)
PartSelect #: PS8758429
Manufacturer #: WR23X10725
The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw...
$14.17
  In Stock
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(6)
PartSelect #: PS217532
Manufacturer #: 40A15
$9.42
  In Stock
Door Shelf Retainer Bar End Cap - Right Side – Part Number: WR2X8700
Door Shelf Retainer Bar End Cap - Right Side
★★★★★
★★★★★
(19)
PartSelect #: PS299259
Manufacturer #: WR2X8700
This is the replacement door shelf retainer bar end cap for your refrigerator. An end cap connects to the lower shelf bar on either side, and then snaps into position on the refrigerator door, allowin...
$19.45
  In Stock
Door Shelf Retainer Bar End Cap - Left Side – Part Number: WR2X8699
Door Shelf Retainer Bar End Cap - Left Side
★★★★★
★★★★★
(7)
PartSelect #: PS299258
Manufacturer #: WR2X8699
This part is the replacement door shelf retainer bar end cap for the left side of your refrigerator door. The end cap is approximately 4 inches by 5 inches and is made of white plastic. The end cap sn...
$20.05
  In Stock
Package of 12 Screws – Part Number: WZ4X244D
Package of 12 Screws
PartSelect #: PS312573
Manufacturer #: WZ4X244D
This is a package of twelve Phillips-head screws. They can be used as replacement screws in refrigerators, ice makers, or freezers. Be sure to check that your appliance model is compatible with these ...   No Longer Available
Vegetable Drawer Slide Rail - Right Side – Part Number: WR17X2769
Vegetable Drawer Slide Rail - Right Side
PartSelect #: PS292796
Manufacturer #: WR17X2769
  No Longer Available
Vegetable Drawer Slide Rail - Left Side – Part Number: WR17X2770
Vegetable Drawer Slide Rail - Left Side
★★★★★
★★★★★
(1)
PartSelect #: PS292797
Manufacturer #: WR17X2770
This is the replacement vegetable drawer side rail for the left side of your refrigerator. It is made of white plastic and is approximately 18 inches long, and 6 inches wide. The slide rail supports t...   No Longer Available
Light Socket – Part Number: WR2X9391
Light Socket
★★★★★
★★★★★
(15)
PartSelect #: PS299782
Manufacturer #: WR2X9391
This part is a replacement light socket for your refrigerator. It connects to the power source, and holds the light bulb. If the light in your refrigerator is not working, you could have a faulty sock...
$14.97
  In Stock
Door Hinge Nylon Washer – Part Number: WR01X27364
Door Hinge Nylon Washer
★★★★★
★★★★★
(2)
PartSelect #: PS12344581
Manufacturer #: WR01X27364
This is the replacement hinge washer for your refrigerator. The hinge washer is mounted on the top of the door hinge pin, and supports the refrigerator door, allowing it to open and close easily. The ...
$6.68
  In Stock

Questions And Answers for 36370942000

Be the first to ask our experts a question about this model!

Common Symptoms of the 36370942000

[Viewing 17 of 17]
Ice maker not making ice
Fixed by
these parts
Show All
Light not working
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Leaking
Fixed by
these parts
Show All
Fridge too warm
Fixed by
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
Show All
Door Sweating
Fixed by
these parts
Show All
Door won’t open or close
Fixed by
these parts
Show All
Freezer section too warm
Fixed by
these parts
Show All
Freezer not defrosting
Fixed by
these parts
Show All
Ice maker dispenses too little ice
Fixed by
these parts
Show All
Not dispensing water
Fixed by
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
Show All
Won’t start
Fixed by
these parts
Show All
Fridge runs too long
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Clicking sound
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sticking Light Switch
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Parts Used:
Light Switch
  • Jonathan from Lilburn, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
108 of 126 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice stalactites were drooling out of the icemaker and gumming up the cubes in the receiving tray.
I first shut off water flow to the fridge. Examination of the package (which was not exact in appearance to the original) demonstrated that the electrical connectors were well-insulated so I arrogantly and successfully proceded without disconnecting the power. My fridge is old enough that the model doesn't appear exactly on anyone's list so I wasn't alarmed that it took an extra 10 minutes or so to noodle out how to adapt the slightly different inlet cowling and electrical cord with extension, but the device is pretty simple.
Soon I loosened the two mounting screws with a nut driver, used a screwdriver to pry away the plastic snap-in housing over the electrical socket on the fridge inner wall and pulled away the electrical plug. The original water fill tube remained in its cavity, ready for re-use.
The new unit's mounting points matched the original screw locations perfectly, as did the fill cowling - which on the replacement icemaker has two possible attachment points. The new unit's electrical connector required an extension pigtail to adapt to my socket, but it was included in the package. The extra cable posed a minor cosmetic issue because it hangs in the collection basket a bit, but that will soon be remedied with a tie wrap.
After the water was restored and an anxious wait of a few hours, we had well-formed ice cubes that weren't all stuck together and the stalactites haven't reappeared.
Parts Used:
Ice Maker
  • Gerald from Benicia, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
86 of 114 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
I unplugged the electrical connection. Then I removed the 2 screws holding the icemaker in place. I lifted out the old icemaker unit and put the new one in place. Then put the 2 screws back in and plugged in the new unit.

The icemaker started making ice very soon after turning the unit on.
Parts Used:
Ice Maker
  • Dan from West Bloomfield, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
76 of 97 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!