EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

36358092891 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice Maker – Part Number: WR30X10093
$207.55
In Stock
Ice Maker
★★★★★
★★★★★
(98)
Part #WR30X10093
This refrigerator ice maker assembly automatically freezes water and releases crescent-shaped ice cubes into the storage bin. It replaces an existing ice maker that has stopped cycling, fails to release ice, or has damaged components. Poor ice production can also result from a restricted water supply or incorrect freezer temperature, so check these conditions before replacing the assembly. Confirm the mounting arrangement, fill cup position, electrical connections, and included adapters against the appliance parts list to ensure the kit matches the original installation. This is an OEM part sourced directly from the manufacturer.
Dispenser Door Assembly or Flapper – Part Number: WR17X11653
$33.60
In Stock
Dispenser Door Assembly or Flapper
★★★★★
★★★★★
(93)
Part #WR17X11653
Warm, moist air stays out of the ice chute when this refrigerator dispenser door flapper closes against the opening. The flap opens during ice dispensing, allowing cubes to pass through, then returns to form a seal when dispensing ends. A cracked, warped, or damaged sealing edge may leave gaps that contribute to frost, condensation, or dripping around the chute. Replacing a damaged flapper helps restore proper closure and reduces air leakage between the freezer and room while the dispenser is idle. This is an OEM part sourced directly from the manufacturer.
Dual Inlet Water Valve – Part Number: WR57X10051
$57.38
In Stock
Dual Inlet Water Valve
★★★★★
★★★★★
(17)
Part #WR57X10051
This valve comes with 1/4" compression inlet. NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depress ring that the tube slides into.
Bearing Slide – Part Number: WR1X2048
$18.22
In Stock
Bearing Slide
★★★★★
★★★★★
(3)
Part #WR1X2048
Sold individually.
Evaporator/Condensor Fan Grommet – Part Number: WR02X10098
$16.05
In Stock
Evaporator/Condensor Fan Grommet
★★★★★
★★★★★
(14)
Part #WR02X10098
This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic and is approximately one inch in diameter. If your grommet is torn or damaged and you are getting noise from the fan motor, you may need to replace it. This is an OEM part sourced directly from the manufacturer.
Plastic Tubing - 5/16 Inch – Part Number: WR17X2891
$40.56
In Stock
Plastic Tubing - 5/16 Inch
Part #WR17X2891
This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.
Ice Dispenser Solenoid Service Kit – Part Number: WR62X23154
$106.80
In Stock
Ice Dispenser Solenoid Service Kit
★★★★★
★★★★★
(8)
Part #WR62X23154
Choose cubed or crushed ice reliably with this refrigerator ice dispenser solenoid service kit. Its electromagnetic mechanism moves the ice selection linkage, directing cubes through the proper path in the ice bucket. A stuck or failed solenoid may leave the dispenser on one setting or cause buzzing without moving the mechanism. Replacing a faulty solenoid helps restore proper ice selection. The kit includes the solenoid, armature, and mounting hardware. Unplug the refrigerator before accessing the dispenser mechanism or disconnecting electrical wiring. This is an OEM part sourced directly from the manufacturer.
Dispenser Grille – Part Number: WR17X4153
No Longer Available
Dispenser Grille
Part #WR17X4153
This white dispenser grill is located at the bottom of the ice/water dispenser.
Dispenser Water Reservoir – Part Number: WR17X4358
$122.47
Special Order
Dispenser Water Reservoir
★★★★★
★★★★★
(1)
Part #WR17X4358
This in-refrigerator dispenser water reservoir tank comes with tubing. This tank stores water until the water actuator is activated and water is requested.
Door Recess Retainer – Part Number: WR2X8818
$16.05
In Stock
ARMATURE KIT – Part Number: WR62X26536
$60.30
In Stock
ARMATURE KIT
Part #WR62X26536
This refrigerator ice dispenser armature kit transfers movement from the solenoid to the ice selection mechanism. It shifts the deflector linkage so ice travels through the crusher blades or bypasses them as whole cubes. A bent, broken, or sticking armature may leave the dispenser stuck on one ice type despite changing the setting. Replacing a damaged kit helps restore movement between cubed and crushed ice selections. Unplug the refrigerator before accessing the dispenser mechanism, and keep hands clear of moving parts during use. This is an OEM part sourced directly from the manufacturer.
Ice Dispenser Plate – Part Number: WR17X2062
No Longer Available
Ice Dispenser Plate
Part #WR17X2062

Common Symptoms of the 36358092891

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cracked housing on the vaave
288 of 308 people found this instruction helpful.
  • anthony from thornton, CO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
1. Turn off water supply, and electrical ( unplug it) to fridge.
2. Remove water line to valve. Watch for water to pour out of the line. Have a towel handy.
3. Remove the cardboard cover on the bottom of the fridge.
4. Remove the screws that hold the valve in place.
5. Remove the valve, be careful the waterlines ar e still attached.
6. Place a towel under valve to catch any water that leaks out from water lines.
7. Remove electrical lines, make sure to mark which went where. One is for the ice, and one is for the water. Make sure the power is off, there is 120 volts present at those connections.
- now my waterlines attached using a compression type fitting. The new valve I got used just a push in type of attachment. But, easy enough I just removed the pieces for the compression and the waterlines pushed right in and worked fine.
- the mounting harness for the valve was alittle different but the parts I need were in the right location and she fit in fine.
8. Attach water lines. They are different sizes so you can't get those mixed up.
9. Attach electrical lines.
- the new valve came with adaptors for my electrical connection. Just snapped them on and kept on going.
10. turn on watersupply for fridge. Plug it back in.
11. Test for leaks, and proper operation. ie. When you push the water does the water valve open?
12. Unplug fridge
13. Now is a good time to clean out any dust or dirt that has accumallated in under around your fridge.
14. reassemble, valve, then cover. move fridge back into place.
15. Plug fridge back in.
16. Take a clean glass.
17. Fill with water from the front.
18. Take full glass of water and go watch tv. You've earned it, and saved yourself probably $100.00 in labor costs. Good Job.
Was this helpful?
Thank you for voting!
ice stalactites were drooling out of the icemaker and gumming up the cubes in the receiving tray.
91 of 133 people found this instruction helpful.
  • Gerald from Benicia, CA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I first shut off water flow to the fridge. Examination of the package (which was not exact in appearance to the original) demonstrated that the electrical connectors were well-insulated so I arrogantly and successfully proceded without disconnecting the power. My fridge is old enough that the model doesn't appear exactly on anyone's list so I wasn't alarmed that it took an extra 10 minutes or so to noodle out how to adapt the slightly different inlet cowling and electrical cord with extension, but the device is pretty simple.
Soon I loosened the two mounting screws with a nut driver, used a screwdriver to pry away the plastic snap-in housing over the electrical socket on the fridge inner wall and pulled away the electrical plug. The original water fill tube remained in its cavity, ready for re-use.
The new unit's mounting points matched the original screw locations perfectly, as did the fill cowling - which on the replacement icemaker has two possible attachment points. The new unit's electrical connector required an extension pigtail to adapt to my socket, but it was included in the package. The extra cable posed a minor cosmetic issue because it hangs in the collection basket a bit, but that will soon be remedied with a tie wrap.
After the water was restored and an anxious wait of a few hours, we had well-formed ice cubes that weren't all stuck together and the stalactites haven't reappeared.
Was this helpful?
Thank you for voting!
Ice maker stopped working
84 of 118 people found this instruction helpful.
  • Dan from West Bloomfield, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I unplugged the electrical connection. Then I removed the 2 screws holding the icemaker in place. I lifted out the old icemaker unit and put the new one in place. Then put the 2 screws back in and plugged in the new unit.

The icemaker started making ice very soon after turning the unit on.
Was this helpful?
Thank you for voting!