3631655590 Kenmore Dishwasher Parts & Repair Help | PartSelect
Models > 3631655590

3631655590 Kenmore Dishwasher - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(119)
PartSelect #:PS11726733
Manufacturer #:WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when ope...
$28.29
In Stock
(49)
PartSelect #:PS2370502
Manufacturer #:WD12X10304
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is...
$7.22
In Stock
(65)
PartSelect #:PS3486910
Manufacturer #:WD12X10327
The dishwasher roller assembly attaches to the upper dishrack. It allows the dishrack to slide out easily. If the upper rack keeps falling off the track in dishwasher, the door wil...
$18.15
In Stock
(9)
PartSelect #:PS259136
Manufacturer #:WD12X271
The lower dishrack wheel on your dishwasher allows the dishrack to roll in and out effectively. If your lower dishrack wheels are damaged, or the rack does not roll in and out, you...
$16.90
In Stock
(12)
PartSelect #:PS263963
Manufacturer #:WD8X227
This baffle fits the lower right hand corner of some dishwashers. It is black rubber and has a matching left hand lower corner baffle. It is recommended that you replace and instal...
$14.71
In Stock
(17)
PartSelect #:PS263964
Manufacturer #:WD8X228
The corner tub baffle may also be known as the door baffle and is a part used on your dishwasher. The left and right side baffle on your dishwasher should be installed and replaced...
$15.01
In Stock
(18)
PartSelect #:PS261346
Manufacturer #:WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn o...
$28.84
In Stock
(12)
PartSelect #:PS263918
Manufacturer #:WD7X14
This part is sold individually. It is recommended that both sides are changed when replacing one.
$18.99
In Stock
(19)
PartSelect #:PS260690
Manufacturer #:WD24X10018
This is used for the check valve.
$22.60
In Stock
(11)
PartSelect #:PS263930
Manufacturer #:WD8X181
The drain valve shaft seal is a part for your dishwasher drain pump valve. This seal creates a watertight closure around the flapper valve shaft. This part can be accessed through ...
$28.12
In Stock
Questions and Answers for 3631655590
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The rollers on the upper rack broke

  • Customer: Carl from Fairfield, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 526 of 536 people found this instruction helpful
There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece then slide the rollers ... read more

Lower rack wheel was melted

  • Customer: Mark from Huntingdon Valley, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 498 of 510 people found this instruction helpful
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience. read more

Wheel broken off bottom rack

  • Customer: Julie from Maumee, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 488 of 491 people found this instruction helpful
Open the tiny plastic package in inserted the wheel onto the "axle". Opened the dishwasher, pulled out the bottom rack and snapped the wheel onto the rack. Done! read more