Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This upper dishrack assembly is a genuine OEM replacement part designed for select dishwashers. It securely holds dishes, cups, and other items during the wash cycle, helping to optimize cleaning perf...
$137.19
In Stock
Order now and your part arrives in 2-3 business days!
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$13.91
In Stock
Order now and your part arrives in 2-3 business days!
This is a pump and motor kit for your dishwasher. This assembly replaces many old-style pump and motor kits that were manufactured since 1970. The instructions are included with this kit in to assist ...
$199.54
In Stock
Order now and your part arrives in 2-3 business days!
This genuine OEM dishwasher door seal gasket prevents water from leaking out of the dishwasher. If your washer is leaking from the door, check for wear on the gasket, and to ensure it is properly fitt...
$32.86
In Stock
Order now and your part arrives in 2-3 business days!
The impeller and seal kit is used in a dishwasher. The kit includes all the parts needed to do this repair, including the impeller, seal, blade, filter, skidder and skidder holder. If your washer is l...
This is the replacement detergent cup release arm for your dishwasher. It is made of black plastic and is sold individually. The detergent cup release arm is found on the inside of the dishwasher door...
$26.87
In Stock
Order now and your part arrives in 2-3 business days!
Discover the value of the GE Finished Access Panel. This essential component is specifically designed to cover and shield the wiring and components at the bottom front of your dishwasher. Crafted with...
$46.82
In Stock
Order now and your part arrives in 2-3 business days!
Enhance the performance of your dishwasher with this genuine GE Detergent Cup Door Spring. Specially designed, this Soap Cup Spring plays a crucial role in automatically opening the dispenser cover wh...
$46.82
In Stock
Order now and your part arrives in 2-3 business days!
The most difficult part was removing the dishwasher from below the counter. Once that was complete, I simply turned the washer onto it's front surface to access the pump easier. Simply disconnected the electrical connectors, loosened the three hose clamps holding the hoses to the pump. Lastly removed a stiff arm bracket holding the pum
... Read morep. Reversed the order to install the new one using a longer bracket provided with the new unit. Hooked up the electrical connections last and slid the washer back in place. The washer runs like new now and is not making noise. The replacement part was a perfect match.
took dishwasher out- put on table to work on-removed wire brace- disconected drain outlet- disconnected top drive seal- removed wire clip connector- removed motor unit---------------- installed new motor/drain unit--used new longer wire brac used adapter to connect electical leads- tightened clamps and bingo it worked and didnt'
... Read more leak. good job on the supplying of all the necessary adapers.
Did the install a few days ago 4.25.11 and all went smoothly. The instructions that came with the kit were very straightforward and the diagrams were extremely helpful in locating brackets/hoses/connections. My dad thought he would just get down there and do it, but wasn't sure what to do. Using the directions with the kit, I had the moto
... Read morer and pump off in under 5 minutes. FOLLOW THE DIRECTIONS WITH THE KIT!
Some things to note: - Get some towels/cups/bowls, we had some water leaking from the dishwasher and hoses. - Be careful removing the dishwasher from the counters, go slow.
1. Shut off electricity 2. Shut off water. I just shut closed the line that went directly to the dishwasher. 3. Removed screws from bottom panel to expose motor and pump assembly. 4. Removed screws securing the dishwasher to the counters. 5. Slowly slid dishwasher from counter and rotated so door was facing the ground carefully to ensure wires/hoses were not pulled or crushed. 6. Removed screw from bottom of motor that was secured to the hanger. 7. Removed ground screw from bottom of motor. 8. Removed all wired connections from the motor and pump. 9. Loosened hose clamp securing the drain line and removed from motor. 10. Loosened 2x hose clamps securing the motor and pump assembly to dishwasher. 11. Ensured everything was clear and disconnected, and slowly removed motor and pump assembly from dishwasher. 12. Test fit new motor and pump assembly. 13. Reconnected 2x connections to the motor and pump. 14. Secured the ground wire to the motor and pump. 15. Slid motor and pump onto dishwasher and secured the 2x hose clamps. 16. Secured screw from the hanger cable to the motor and pump. 17. Reconnected water line to motor and pump, and tightened hose clamp. 18. Ensured all connections were made, hose clamps were tightened, and there were no extra connections. 19. Rotated dishwasher back onto feet. 20. Slowly slid dishwasher back into counters ensuring no cables or hoses were kinked or crushed. 21. Restored electricity and water to dishwasher, and then performed a quick test of one cycle to check for leeks. 22. Secured bottom panel and dishwasher to counters. 23. Enjoyed having a working dishwasher again!
