Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 36275980891

36275980891 Kenmore Range - Overview

Get Parts and Repair Help for 36275980891

If you know the range repair part you need, you can browse the list of all parts on the 36275980891, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 36275980891 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.80

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

Order within the next 7 hrs and your part ships today!
$44.17

Flat Style Oven Igniter Kit

The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to heat your oven. If you notice that your oven will not heat up properly, the igniter kit may need to be replaced. This flat style gas oven igniter has a body length of 3-3/4 inches. When completing this repair, the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. Before you begin this repair, be sure to disconnect the power source from the oven, and shut off the gas supply.

Order within the next 7 hrs and your part ships today!
$45.18

Oven Rack

The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides ...

Order within the next 7 hrs and your part ships today!
$1.29

Cooktop Mounting Screw

Order within the next 7 hrs and your part ships today!
$108.02

Oven Sensor

It is possible that your oven is cold because of a fault in the temperature sensor. The temperature sensor regulates oven temperature in modern ranges, like a thermostat. It is on ...

Order within the next 7 hrs and your part ships today!
$3.38

SCREW

Sold Individually.

Order within the next 7 hrs and your part ships today!
$3.60

CLIP ELECTRODE

Sold individually.

Order within the next 7 hrs and your part ships today!
$7.21

Oven Light Socket - With Push In Receptacle

Order within the next 7 hrs and your part ships today!
$39.79

Burner Cap - Medium

This burner cap sits on top of the burner base.

Order within the next 7 hrs and your part ships today!
$87.29

Burner Spark Module - 120V 60Hz

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Order within the next 7 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The igniter glowed, but never got hot enough to ignite the propane, so I did smell propane.

  • Customer: Sidney from Marysville, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 637 of 660 people found this instruction helpful
First, I removed the two screws that held the heat shield in place. Second, I removed the one screw that held a small wire covering. That covering kept the wires inside the back wall of the range. Third, I removed the two screws that held the Igniter Kit, and unplugged it from the back of the range. I then carefully put the new igniter in, and reassemble... read more

oven would not light or keep temp.

  • Customer: zack from corning, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 432 of 438 people found this instruction helpful
first I thought it was a faulty gas valve, so I pulled it out, started researching for a replacement part, found your site and started research. I discovered thhat the igniter was the culprit, that info. saved me about a week of time and a 100 bucks, so I installed the gas safety valve back in the oven, patience is the word for the day, you cross thread thi... read more

Oven wouldn't heat. This degraded over several weeks.

  • Customer: Durwood from Suffield, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 289 of 364 people found this instruction helpful
1. Pulled the 110V power plug. It was not necessary to turn off the gas; just be careful not to stretch or pinch the flexhose behind the stove.
2. Removed the oven door by opening a couple of inches then lifting upward.
3. Removed the warming drawer by pulling out to the stop, then pushing the small levers on the side of the track to release.
read more