This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
This Genuine OEM GE Electrode Clip is a precision-engineered component designed for use across a wide range of gas ranges. Constructed from durable metal, the clip plays a critical role in securing the electrode top within the rangetop and bracket assembly, ensuring stable and reliable ignition performance. Sold individually, this replace...Read morement part is ideal for routine maintenance or repair. For ease of installation, a pair of pliers is often recommended to assist with proper placement. Trust in genuine GE parts to maintain the safety and efficiency of your appliance.
This is a replacement cooktop mounting screw, used to secure the burner. If you are missing that screw on your range, this is the part to replace it. This screw is about a half an inch in length and is sold individually. It is an OEM part sourced directly from the manufacturer.
This is the replacement burner cap for your gas range. It is made of gray plastic and is approximately 3 inches in diameter. It has 3 small tabs on the bottom, with one tab that is larger than the others. This tab fits into the v-shaped slot. The burner cap is found under the grate, and it protects the burner. If your current burner cap i...Read mores damaged or missing, this is the part that replaces it. Before you begin this repair, be sure that the burner cap and the grate are cool to the touch. To replace the burner cap, simply lift the grate off and remove the cap. Replace it with the new cap to complete your repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.
This orifice spud is designed to facilitate a safe and efficient conversion from natural gas to liquid propane in the right rear burner of compatible GE stoves. Manufactured to OEM specifications, it ensures precise gas flow and optimal burner performance during the conversion process. The component plays a critical role in maintaining pr...Read moreoper combustion and preventing operational issues. Installation should be performed with the appliance disconnected from power and gas supply, and it is recommended to consult a qualified technician to ensure correct setup and safety. Always verify your appliance model before installation to confirm compatibility.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Damaged both front burner tubes.
15 of 15 peoplefound this instruction helpful.
william from Tampa, FL
Really Easy
15 - 30 mins
Screw drivers, Wrench set
While i was inserting the new lp,gas orriface to the right rear burner tube I dropped the oriface.Without looking i popped the top of the burner unit, like most older type stoves, and thats when i ran into my problem. I realized the burner tube assemblies are attached by 3 screws to the top cover.Not attached to the cabinet as the older m
... Read moreodels, Basically cracked both front aluminum tubes trying to retrieve the dropped oriface. so i had to replace the burner tube units, which involved removing 3 screws, and loosing up and removal of the nut to the main gas tube. extremely easy repair, next time i`ll try to remember look before i leap,total time to (r+r)burner tubes about 20 minutes.Parts select pulled me out of the fire on this one, great staff and service, with quick delivery.
Here's how I fixed my problem. I took the aluminum cover, the part that sits over the jet & the igniter, which simply comes off. It's the part that the igniter discharges to. I took this cover off & using a pencil I scratched the lead of the pencil into the area which is around the igniter. I made sure to cover the area wit
... Read moreh as much lead as I could get on it. You need to make sure that you do this to all four burners. The only care you need to take, is not to block the gas jet which is in the igniter recess. It's been about 3 weeks since I added this & the burners click loudly & have lit without a problem. It appears that the aluminum may develop a coating on it of some kind which is highly resistive.
Read less
Was this helpful?
Thank you for voting!
Interior light needed replaced
22 of 45 peoplefound this instruction helpful.
Leo from TWIN FALLS, ID
Really Easy
Less than 15 mins
Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.