This is the replacement propane orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies liquid propane from the gas line to the stove top. Be sure to disconnect your range from its power source and turn off the gas line before you begin this repair. The orifices should simply screw o...Read moreut, and the new one will screw in. This part is about ¼ of a inch in diameter and is gold in color. It is sold individually and is a genuine OEM part.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Converting a Natural Gas stove to propane
3 of 3 peoplefound this instruction helpful.
Bruce from Ponchatoula, LA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers, Wrench set
First just unscrew each natural gas jet and install the propane jets. if they are hard to come off just turn your wrench back and forth first until the jet turns with your fingers. Then open the oven and take out the racks. In the bottom back of the inside of the oven there is a screw on each side. Unscrew both screws lift the bototom pla
... Read morete of the oven and slide it back about 1/2 inch then lift out of the oven. Move the 1 screw covering the heat shield from the oven jet. Then light the top burners and turn them off just to get the gas flowing. Also light the pilot in the oven, then light the oven. To convert the oven from natural gas to propane all you have to do is adjust the jet while the oven is lit. turn the oven jet ubtil there is a blue flame with little or no yellow tips on the flames.
Read less
Was this helpful?
Thank you for voting!
Rusty handle
george from havelock, NC
Easy
Less than 15 mins
Screw drivers
Handle on stove was rusty and owner wanted it replaced