Models
>
36271071890
36271071890 Kenmore Range - Overview
Sections of the 36271071890
[Viewing 3 of 3]
Manuals & Care Guides for 36271071890
Click to downloadKeep searches simple, eg. "belt" or "pump".
Oven Rack
PartSelect #: PS6447646
Manufacturer #: WB48T10095
The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for e...
$67.42
In Stock
Double Burner Assembly
PartSelect #: PS232404
Manufacturer #: WB16K10026
Both burners are mounted on the same bracket.
$71.32
In Stock
Door Bumper - Black
PartSelect #: PS241365
Manufacturer #: WB2K15
Sold individually.
$13.92
In Stock
Screw
PartSelect #: PS283515
Manufacturer #: WR01X10065
Size: 10-32 GXTT FLP .595
Sold individually.
$8.06
In Stock
Screw
PartSelect #: PS221932
Manufacturer #: WB01K10002
Size: 8-32 inch Sold individually.
$20.93
In Stock
Burner Valve
PartSelect #: PS235455
Manufacturer #: WB21K38
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
$94.69
In Stock
Hinge - Left or Right Side
PartSelect #: PS230758
Manufacturer #: WB10K12
This door hinge can be used for the left or right side. Sold individually.
$47.11
In Stock
Anti-Tip Arm
PartSelect #: PS241362
Manufacturer #: WB2K12
NOTE: This is used with anti-tip kit when there is a cement floor.
$7.68
Special Order
Questions And Answers for 36271071890
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 36271071890
[Viewing 4 of 4]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My old burners were beyond the point of coming clean and made my stove top look bad.
My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.
Parts Used:
-
Helen from Flemington, NJ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
23 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven rack missing when I purchased the house
I was very pleased with how quickly the new oven rack arrived and it was a perfect fit. Thanks.
Parts Used:
-
Patricia from Houston, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
18 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were burning the pans and flames coming out at all different angles of the burner
The toughest part of the repair was the preparation to remove the old burners. As a result of the burning there was a carbon residue on the burners, on the gas outlet feed to the burners. This took some scrubbing and removing the carbon residue. Bits had burned onto the outlet and had to be scrapped off. Once all cleaned, replacing th
... Read more
e burners was easy just had to place the balancing nuts in place and put on the burners. One problem arose the hood of the stove did not go back in place after replacing the burners so I then removed the balancing nuts put back on the burners stove top hood fit back in place and burners operated properly. This part of the repair took five minutes.
Read less
Parts Used:
-
ANNE from HICKSVILLE, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
13 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!