This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.
This OEM Vacuum Bag holds grass and leaf clippings when the blower is switched to vacuum mode, and is attached to the exit port. It is constructed of white fabric. If broken due to wear/fatigue it will no longer be able to hold clippings and should be replaced. Refer to your make, model and diagrams to see if this is the right part for your machine.
This metal ring in your engine, known as the piston ring, seals the gap between the piston and cylinder wall. It makes sure that the gases produced during combustion do not escape and that the engine maintains the pressure it needs to run. If the piston ring is damaged, oil can seep into the combustion chamber, causing your engine to exhi...Read morebit rough idling and your machine emit blue smoke. To switch out a defective piston ring, detach the old ring from the piston with a screwdriver. When installing the new ring, you may need to compress it to make it fit properly. Please be aware that this genuine OEM replacement part is bought individually. It is recommended that you replace all the piston rings in your machine at once, as they tend to wear down at the same rate. Carefully review your user manual to determine how many rings your machine needs before placing your order.
This replacement air filter is an authentic component which is supplied directly from the original equipment manufacturer for use with Craftsman backpack blowers. The purpose of the filter is to prevent dust and debris from contaminating the carburetor and the engine. Over time it will get dirty and clogged restricting the air flow, inspe...Read morect the filter periodically and replace it as needed to maintain peak performance. It is made of high-quality foam material and it is sold individually.
This replacement lower vacuum tube is a genuine OEM supplied part that is designed for use with Poulan backpack leaf blowers. It interlocks with the other blower tubes to provide user with an extended reach. Over time this part can crack allowing for air leaks, this will greatly decrease blowing ability of the unit, at this point part sho...Read moreuld be replaced. This tube is made from high quality plastic and it is sold individually.
This authentic Gasket Kit is a kit which contains everything needed for the entire unit. Replace if broken, damaged or worn. Refer to your make, model and diagrams if you are unsure if this is the correct kit for you.
This replacement screw is a high quality hardware that is designed for use with Paramount, Poulan and Weed Eater power equipment. It has multiple applications depending on your equipment, please make sure to check appropriate diagrams for correct location and use of this item. One durable hex socket head screw is included per order.
This is a genuine OEM approved replacement part designed for use with Hitachi nailers. The piston is a central component of an engine. It both provides compression within the engine, as well as transfers the energy from combustion to the crankshaft (which creates rotation). This assembly includes the metal piston, ring, two retainers and ...Read morethe pin. Replacing the piston assembly is not the simplest repair, but it is definitely something you can do yourself. You will need a screwdriver to remove the cover and a set of sockets and wrenches for the rest of the repair.
This is an authentic OEM sourced replacement part which is specially designed for use with handheld lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.
This is an authentic replacement part manufactured for use with gas-powered leaf blowers. The plastic elbow is used when using the vacuum mode, and the elbow links the collection bag and the vacuum tubes. The vacuum tube elbow is available as an individual replacement part, please see model diagram for associative parts.
It is a high quality item that is specially designed for use on handheld lawn and garden equipment. This screw is used to secure the throttle housing pieces together, please make sure to check appropriate diagrams for correct location and use of this hardware. Note that one torx screw is included per order.
This is an authentic replacement part manufactured for use with gas-powered leaf blowers. The impeller kit includes the washer and is used to thrust air through the blower tubes. This impeller kit is available as an individual replacement part, please see model diagram for associative parts.