Also referred to as a Recoil Spring, this OEM replacement part is used to rewind the pull rope back into the starter housing. This Spring is sold individually, not as part of a kit or assembly, and is made of metal.
If the pull cord will not retract into the housing, inspect the Recoil Spring for signs of wear or damage, replacing if ne...Read morecessary. You will need a screwdriver to complete this repair.
Customers rate this repair as Easy.
This is an authentic replacement part supplied from Poulan. It is generally used with gas powered chainsaws. This nut in conjunction with a bolt (sold separately) helps to secure air filter and carburetor. Requires a wrench installing/removing this item. It is sold individually.
This genuine manufacturer sourced replacement part is specially made for use with a variety of handheld lawn and garden equipment. This part is installed on top of the piston/connecting rod. Its purpose is to create a seal in the cylinder so that it can build pressure. A worn or broken piston ring will allow combustion gases to escape the...Read more seal and enter the crankcase, causing low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Includes one (1) metal piston ring. Tools Required: Receptacle for draining fuel, Torx wrenches, spark plug wrench, 10mm wrench (or adjustable), long-nosed pliers, rubber mallet, standard screwdriver, old starter rope (or similar cord), adjustable pliers, 2-cycle engine oil, razor blade, ignition gapping gauge. • Remove the air cleaner • Drain the fuel • Remove the air cleaner case • Remove the carburetor • Remove the intake insulator • Remove the spark plug • Remove the engine cover • Remove the insulator gasket • Remove the starter assembly • Remove the fuel tank • Remove the air duct • Separate the engine • Bind the engine • Remove the clutch • Remove the flywheel • Remove the starter pulley • Unbind the engine • Remove the muffler • Separate the cylinder from the crankcase • Remove the piston ring • Install the piston ring
This is a genuine item that is supplied by the original equipment manufacturer for use with Poulan handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty cover which helps to protect and secure the air filter which is sold separately. Please make sure to refer to the appropriate diagrams of your model...Read more for the correct location and application of this item. Keep in mind this high-quality cover is made of durable plastic and is sold individually.
This is a genuine Poulan replacement part that has been sourced from the original manufacturer to be used with hedge trimmers. The fuel tube grommet attaches to the fuel tank. This item is used to seal the area around the fuel tube where the tube enters the tank. This item is sold as an individual replacement part.
This is a genuine replacement cutting blade sourced directly from original equipment manufacturer. It is commonly used on Poulan handheld hedge trimmers. It is designed to cut limbs and small branches on hedges and bushes. This steel blade stays sharp longer and it also helps to reduce vibration while trimming. Includes one (1) 22" blade per order.
This is a genuine manufacturer-sourced replacement part which is specially designed for use with Poulan and Husqvarna lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality item is made of durable metal and is sold individually.
This is an original replacement part manufactured for use with trimmers. The special bolt is used to fasten the muffler to the cylinder. A hex key is required to install the bolt, and it is sold individually.
This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap y...Read moreour spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install this component.
This genuine manufacturer-sourced part is specially designed for use with Poulan and Husqvarna handheld lawn and garden equipment. It provides an identical replacement for a missing or a faulty spring for the starter mechanism. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of ...Read morethis component. Keep in mind this high-quality spring is made of durable metal and is sold individually.
This is a genuine item that is supplied by the original equipment manufacturer for use with Poulan hedge trimmers. It is an identical replacement for a missing or a faulty blade assembly that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this co...Read moremponent. Keep in mind this high-quality blade is made of durable metal and is sold individually.