My Orders
35877310 Craftsman Edger - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$12.81
In Stock
Fuel Line (25" Length)
Part #530069247
This 25-inch fuel line carries fuel from the tank to the carburetor, ensuring proper engine operation. Made from durable clear plastic, it is designed to withstand regular use but may become clogged or brittle over time. Replacing a worn or damaged line can help prevent leaks and restore reliable starting and performance.
$9.62
In Stock
Engine Fuel Filter
Part #530095646
This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.
Read less
$14.25
In Stock
Fuel Line
Part #530069599
This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.
$7.36
In Stock
Edger Blade
Part #530095086
These Weed Eater Blades are 8-3/8 x 1-1/2 inch black, metal blades which come individually sold and attach to the output shaft. Installation requires a wrench set and socket set, and is rated as "Easy". This blade is used for edging the grass around walkways and driveways. If the blade hits pavement it may break, and you will notice a vib...Read moreration or poor trimming, and the part must be replaced. Refer to your make model, and diagrams to ensure you're choosing the correct part.
Read less
$7.65
In Stock
Fuel Line Fitting
Part #530023877
The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "Easy". Refer to your make, model and diagram to ensure this part is correct for you.
$12.05
In Stock
Fuel Cap
Part #530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic.
Because of everyday fatigue and wear, the cap can become damaged over time and must be replaced. You will know if it is time to replace ...Read moreyour fuel cap if you notice visible damage or experience fuel leaking from it. You can make this repair by hand, just attach the cap directly back onto the fuel tank.
Most of our customers found this repair very easy.
Read less
$28.55
In Stock
Walbro Gasket/Diaphragm Kit
Part #530069844
This is an authentic OEM replacement kit for use with lawn and garden equipment. Each kit includes the carburetor, cylinder, crankcase, and muffler gaskets. The carburetor gasket seals the area between the carburetor and engine block to prevent the entry of contaminants into the carburetor. The crankcase gasket prevents oil from leaking o...Read moreut of the crankcase. The cylinder and muffler gaskets prevent the combustion and exhaust gases from escaping. If you are experiencing common problems such as leaking, loss of compression, and poor engine performance this indicates that your gaskets may be worn down or damaged and need replacement. Carefully remove the old gaskets and thoroughly clean the mating surfaces where the new gaskets will be installed to ensure a good seal. Install the new gaskets and ensure that they fit properly.
Read less
$39.55
In Stock
Flywheel
Part #545221701
This flywheel is an authentic manufacturer replacement part for use with lawn and outdoor equipment. The flywheel is a heavy, circular disc that has magnets that create an electric charge sent to the spark plug to create the spark that ignites the fuel and air mixture in the engine. It is attached to the engine crankshaft by a key known a...Read mores a shear pin or flywheel key. This assembly is a critical component in the starting and running of your power equipment. Over time, the magnets on the flywheel will wear down, and the flywheel may chip and crack. A faulty flywheel will result in a loss of power, excessive shaking during use, and difficulty starting the equipment. Remove the flywheel using a flywheel puller. Position the new flywheel on the crankshaft and secure it with the retaining nut and flywheel key. This flywheel is sold as an individual replacement part.
Read less
$6.95
In Stock
Piston Ring
Part #545154001
This metal ring in your engine, known as the piston ring, seals the gap between the piston and cylinder wall. It makes sure that the gases produced during combustion do not escape and that the engine maintains the pressure it needs to run. If the piston ring is damaged, oil can seep into the combustion chamber, causing your engine to exhi...Read morebit rough idling and your machine emit blue smoke. To switch out a defective piston ring, detach the old ring from the piston with a screwdriver. When installing the new ring, you may need to compress it to make it fit properly. Please be aware that this genuine OEM replacement part is bought individually. It is recommended that you replace all the piston rings in your machine at once, as they tend to wear down at the same rate. Carefully review your user manual to determine how many rings your machine needs before placing your order.
Read less
No Longer Available
Fuel Tank Assembly
Part #580236101
This replacement fuel tank assembly is a genuine OEM sourced item. It is specially designed for use with Weed Eater gas powered string trimmers and edgers. This assembly includes a plastic fuel tank, fuel lines, fuel cap and the screws to secure it. To complete this repair you will need a screwdriver.
$6.95
Special Order
Dog
Part #530027162
This is an original part from Craftsman for edgers and chainsaws. This part helps turn the flying wheel when you pull on the starter rope. You may need a wrench set to replace this part. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable plastic and sold individually.
$76.16
Special Order
Carburetor
Part #530071634
The OEM Carburetor Assembly includes the carburetor and primer bulb. This assembly is used to mix the air/fuel mixture to the proper ratio for combustion, and attaches to the intake of the engine. Installation requires a screw driver, pliers and socket set, and is rated as "Easy" by customers. If broken due to wear/fatigue/damage, the eng...Read moreine will run rough, be hard to start and have performance issues. If this happens, the part should be replaced. Refer to your make, model and diagrams to ensure this part is correct.
Read less
Common Symptoms of the 35877310
How this model fails, and the parts that fix it.
Will Not Start
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
![Replacing the Fuel Line (25" Length)](https://img.youtube.com/vi/TJyUt4IFwD0/maxresdefault.jpg "Replacing the Fuel Line (25" Length)")
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
installing fuel through fuel tank wall
10 of 17 people
found this instruction helpful.
To start, remove the plastic carburetor grill. DO NOT remove the carburetor. The fuel line has to be sliced down to fit through the tank hole and get it in far enough up into the tank to grab with needle nose pliers.( need long needle nose pliers which I didn't have) I placed about six inches of the plastic tubing in the jaws of vice so t
... Read more
hat half of the tube was squeezed in the vice jaws. I then used a razor blade to shave off the exposed tube. I slipped the shaved end of the tube up through the tank hole far enough to grab with long tweezers and pulled it up to where I could grab it in the tank with needle nose pliers. I put light lube oil on the remaining tubing and pulled it through. It takes a steady firm pull to pull it in. Install the filter and pull the tube back down into the tank. I also used a small diameter drill bit and with my fingers slightly reamed the tube ends to ease the tube over the filter and carburetor nipples. To prime the engine, spray starting fluid into the carburetor and start. Repeat until the engine will run on fuel. It took me hours to figure this out, but will take less than an hour with this method.
Read less
Other Parts Used:
![Fuel Line (25" Length) – Part Number: 530069247](/9008183-1-S-Husqvarna-530069247-Fuel-Line-25-amp-quot-Length.jpg "Fuel Line (25" Length) – Part Number: 530069247")
Was this helpful?
Thank you for voting!