This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.
This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.
The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installation is rated as "Easy" by customers and requires a screw driver, pliers, and torx screwdriver. If the rope breaks it should be replaced. Ref...Read moreer to your make, model and diagram to ensure this rope is right for your machine.
This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and designed for use in a variety of lawn and garden power equipment. If the valve is jammed, worn down, or contaminated with dirt and debris, it wil...Read morel be unable to open and close properly, thus restricting the flow of fuel and compromising the engine combustion process. You will likely notice fuel leaks around the carburetor, engine stalling, hard starting, and overall lower performance from your equipment. To remove the faulty valve, carefully disconnect any hoses or fasteners connected to it. Place the new valve in position and secure it appropriately.
This bar adjusting pin hooks onto the crankcase along with the bar adjust retainer and the screw. When you tighten the screw it helps to place tension on the bar. This high-quality pin is made out of metal and is sold individually. It is an authentic OEM sourced item which is specially produced for use with Poulan chainsaws. A screwdriver and a socket set may be needed when replacing this part.
This replacement pre-cleaner filter is supplied directly from the original manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. Its purpose is to ensure the air that goes into the engine is free of dust and other contaminants. Over time the filter may get dirty and clogged eventually requi...Read morering replacement. It is made of high-quality foam material and it is sold individually, please note the main pleated paper filter is sold separately.
This is an authentic OEM sourced replacement air cleaner filter which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this component is to ensure that the air supplied to the unit is free of dust and other harmful contaminants. Over time it may wear out and get...Read more clogged eventually requiring a replacement to maintain your equipment at peak performance. Keep in mind this high-quality pleated paper filter is sold individually.
This authentic item is supplied directly from the original equipment manufacturer for use with Poulan chainsaws. It is an identical replacement for a missing or a damaged screw that was installed on a new unit. The part is an important component of the bar adjusting mechanism. Make sure to check the appropriate diagrams of your model for ...Read morethe correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually. A screwdriver will be needed to perform this repair.
This fuel tank stores gasoline for small engines used in snow-removal equipment. Designed for cold-weather operation, it provides reliable fuel supply while resisting cracking and leaks. Replacing a damaged or leaking tank restores proper fuel containment and dependable engine performance during operation.
This item is an authentic Ridgid kit-carb that has been sourced from the original manufacturer to be used with chainsaws. Over time due to regular use parts tend to wear out and they may begin to fail eventually requiring replacements to ensure your tool functions properly. This kit includes all the recommended component to be replaced wh...Read moreen repairing your carburetor. To ensure the proper procedure, refer to the owner's manual and the diagrams for your model. A screwdriver, a wrench set, and pliers might be needed to replace these components.
This control brake bracket assembly is a genuine OEM Tecumseh replacement used on small gasoline engines to support the brake and engine stop controls. It helps ensure proper operation of the flywheel brake and safety shutoff system and is an ideal replacement when a bent, damaged, or worn bracket causes improper braking, stopping issues, or unsafe engine operation.