This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.
This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and designed for use in a variety of lawn and garden power equipment. If the valve is jammed, worn down, or contaminated with dirt and debris, it wil...Read morel be unable to open and close properly, thus restricting the flow of fuel and compromising the engine combustion process. You will likely notice fuel leaks around the carburetor, engine stalling, hard starting, and overall lower performance from your equipment. To remove the faulty valve, carefully disconnect any hoses or fasteners connected to it. Place the new valve in position and secure it appropriately.
This replacement screw is a high quality hardware that is designed for use with Paramount, Poulan and Weed Eater power equipment. It has multiple applications depending on your equipment, please make sure to check appropriate diagrams for correct location and use of this item. One durable hex socket head screw is included per order.
This replacement screw is a high quality hardware that is commonly utilized on Husqvarna chainsaws. It is an authentic OEM item that has multiple uses, for correct location and application of this screw please make sure to check appropriate diagrams. One durable metal hex socket head screw is included per order.
This metal pin is available as an individual replacement. It attaches to the left motor housing with the bar adjusting plate and helps to place tension on the bar. The pin may require a screwdriver, pliers, and a socket set to replace if it becomes broken. This is a genuine replacement part that is sourced from the original manufacturer for use with Poulan and Husqvarna chainsaws.
This is an authentic replacement part manufactured for use with Husqvarna chainsaws. The multi-tool is used to service the chainsaw. The tools hex socket can be used to remove parts such as the chain brake cover nuts or spark plug. The multi-tool has a flat screwdriver that can be used to adjust the tension of the bar. This multi-tool is sold as an individual replacement part.
This saw chain is a low kickback chain. It met the kickback performance requirement of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. All cutting chain can kickback , which may result in severe personal injury to ...Read morethe chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator manual.
This saw chain is a low kickback chain. It met the kickback performance requirement of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. _b_All cutting chain can kickback_/b_, which may result in severe personal injur...Read morey to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator manual.
It is an authentic OEM sourced item which is specially produced for use with Poulan chainsaws. The bar adjusting plate goes between the pin and the screw. This may require a screwdriver, a set of pliers, and a socket set during installation. It is made of metal and will need to be replaced if it becomes broken. This part is available as an individual replacement.