355ZB2446 (5900775) Snapper Lawn Tractor - Overview

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This is a genuine OEM sourced replacement exhaust gasket. It is specially made for use with Briggs and Stratton engines commonly used on Toro lawn and garden equipment. Its purpose is to provide an air-tight seal between the carburetor and the exhaust tube. Over time this gasket will deteriorate requiring replacement. Please note, this co...Read moremposite gasket is sold individually. To replace this part you will need a wrench.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is an OEM approved replacement cartridge commonly used on Briggs and Stratton engines. It is designed to filter out dust and dirt from entering engine. Includes one (1) pleated paper filter and one (1) foam pre-filter per order. Replacing this air filter element is easy and would only require a screwdriver. • Remove filter cover...Read more by taking out screws • Replace old filter with a new one • Reassemble in reverse order

Sourced directly from the original equipment manufacturer, this Spring Washer is used to spread the load under a bolt or nut. It has an I.D. of 0.475 inches, is made of metal, and is sold individually, not as part of a kit or assembly. If you notice any signs of corrosion, cupping, wear, or damage, you will need to replace the Spring Wa...Read moresher. Refer to your owner's manual to determine the exact location of this part on your model.

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

Introducing the starter solenoid from Simplicity specially designed to ensure your lawn tractor operates smoothly and efficiently. This solenoid plays a crucial role in sending battery current to the engine starter as you turn the ignition switch into the start position. Made from high-quality materials and crafted with careful attention ...Read moreto detail it serves as a durable and reliable addition to your lawn tractor machinery. Before installing remember to disconnect the battery and make sure to wear work gloves for your safety. This solenoid is included in a kit for your convenience. Trust Simplicity for all your lawn tractor parts needs.

This is an original replacement part manufactured for use with lawnmowers. The special deflector kit is used to direct the grass clippings out of the side discharge chute. This deflector kit includes the plastic deflector shield and the hardware used to mount the deflector. The deflector kit is sold as an individual replacement part.

This is an authentic part produced by original manufacturer. It is used in various tractors and lawn mowers built by Murray, Snapper, and Simplicity. Ball bearings mainly serve to hold and buffer moving parts, reducing friction. They also assist in keeping parts moving in the correct position. Therefore, they are high wear items with regular replacement needs. Sold individually.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is a genuine OEM sourced replacement part that is specially produced for use with Snapper and Simplicity riding lawn mowers and garden tractors. It is designed with curved edges to circulate the grass longer so it can be cut into smaller pieces. This makes the grass clippings better as mulch allowing them to decompose quicker. Please note this high-quality part is made of durable metal and is sold individually.

This is a genuine replacement part manufactured for use with lawnmowers. Self-locking rings are designed to fix to a shaft without a groove to sit in. The ring can be pushed on, and is used in a variety of capacities. The self-locking ring is sold individually, please see model diagram for part location and use.