34DN-4CKXW Maytag Range Parts & Repair Help | PartSelect
Models > 34DN-4CKXW

34DN-4CKXW ((25X)) Maytag Range - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(39)
PartSelect #:PS1573892
Manufacturer #:12400035
The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part c...
$43.58
In Stock
(1)
PartSelect #:PS11744673
Manufacturer #:WP7711P466-60
This clock knob is just under an inch long. It is black in color and is made of plastic. There is a chrome disc of decoration on its top.
$21.06
In Stock
PartSelect #:PS2037555
Manufacturer #:3412A004-19
This double burner design is not to be used with sealed burner style models.
No Longer Available
(2)
PartSelect #:PS12731250
Manufacturer #:W11400301
This square burner grate has sides measuring approximately nine inches. It is all black in color.
$77.64
In Stock
PartSelect #:PS2178475
Manufacturer #:W10125641
Sold individually.
$14.46
On Order
(1)
PartSelect #:PS1643402
Manufacturer #:7201P036-60
$79.51
On Order
PartSelect #:PS2002845
Manufacturer #:12001079
No Longer Available
PartSelect #:PS1603106
Manufacturer #:3418A029-34
The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.
No Longer Available
PartSelect #:PS1603107
Manufacturer #:3418A030-34
The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.
No Longer Available
PartSelect #:PS2007407
Manufacturer #:12500102
This kit includes 4 burner knobs and 1 thermostat knob.
No Longer Available
Questions and Answers for 34DN-4CKXW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven would not work but the Broiler did

  • Customer: James from Ferndale, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 330 of 360 people found this instruction helpful
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that ... read more

Oven would'nt light

  • Customer: Charles from Charlestown, RI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 127 of 137 people found this instruction helpful
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The ne... read more

oven failed to light

  • Customer: Beryl from Dawsonville, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 68 of 71 people found this instruction helpful
My son replaced the broiler igniter this spring, so I had a clue as to what was required. This was even easier and since I had back surgery recently & my husband was out of town that was a giant plus!

I unplugged the oven, removed the oven door, found the release latch and removed the oven floor. I then removed the 2 screws that held the ignit... read more