This is a genuine replacement belt sourced directly from the original manufacturer, designed for use with riding lawn tractors and mowers. Made from durable rubber and sold individually, this belt is responsible for driving the mower blades, making it a critical component for cutting performance. To ensure optimal function and longevity, ...Read moreit’s important to clean the pulleys before installing the new belt and to inspect the belt regularly for signs of wear or stretching. Replacing the belt requires a wrench set and pliers. For safety, always disconnect the spark plug wire before beginning. Start by lowering the mower deck to its lowest position and setting the blade engagement lever to the "Off" position. Roll the old belt off the engine pulley from between the belt guide and pulley. Remove the mower deck by taking out the bow-tie pins securing the left and right lift arms, then disconnect the blade engagement cable. Next, remove the bolts from the mower deck belt pulley covers and take off the covers. Loosen, but do not remove, the nuts on the top of the idler pulleys. Install the new mower deck belt through the belt guides and around the pulleys, then tighten the idler pulley nuts. Finally, reassemble the deck to complete the repair and restore your mower’s cutting performance.
Lawn mower deck belt. Width: 1/2 " Length: 95 1/2 ".
This authentic manufacturer-supplied part is specially designed for use with riding lawn mowers and garden tractors. It is a special component that wheel axles attach to. This is an identical replacement for a missing or a damaged axle assembly front that was installed on a new unit. A wrench set will be needed to perform this repair. Mak...Read moree sure to refer to the owner\\\'s manual and the appropriate diagrams for your model to ensure the proper repair procedure. Note, this high-quality axle assembly front is made of durable metal and is sold individually.
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Craftsman lawn and garden equipment. This is an identical replacement for a missing or a faulty tractor lift assembly link that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this component. This high-quality assembly is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.
This link lift is an original part from Weed Eater, Ryobi and Poulan for lawn tractors and lawn mowers. This part connects to the front of the mower deck and to the bracket underneath the front axle. It is recommended to review your models diagram to verify the parts compatibility.This link lift is sold individually and made of metal.
This nylon bearing is a genuine OEM part used for various makes and models of tractors and lawn mowers and is sold as an individual part. Measuring 0.5-inches tall, this bearing is used to secure the roll pin to the pedal cover and will require a wrench when you replace it.
Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.
This item is available as an individual replacement part. The knob attaches to the shift rod and is made out of plastic. During replacement, no tools should be needed to install this part correctly. It will require replacing if it breaks or strips. This genuine item is supplied by the original equipment manufacturer for use with tractors and lawn mowers made by Poulan, Husqvarna, Weed Eater, and Jonsered.
This deflector rod is an original part from Craftsman for lawn tractors and mowers. This part connects to the deflector shield and allows the deflector shield to swivel down and up. You will need a socket set and wrench set to replace this deflector rod. This deflector rod is made of metal and sold individually.
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Poulan, Husqvarna and Weed Eater lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of t...Read morehis hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.
It is a high-quality sector gear which is supplied by the original equipment manufacturer for use with riding lawn mowers and garden tractors. This is an important component of the steering mechanism. Over time parts will wear out and may begin to fail eventually requiring a replacement. Keep in mind this sector gear is made of durable me...Read moretal and is sold as an individual item. Note, the hardware to secure it is sold separately. A wrench set might be needed to perform this repair. Refer to the diagrams for your model to ensure the proper replacement procedure.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The tie rod on my 20 year-old lawn tractor snapped.
1 personfound this instruction helpful.
James from CEDAR SPRINGS, MI
Very Easy
Less than 15 mins
Wrench set
I used two wrenches, unscrewed both ends of the old tie rod and it fell out. In nearly no time, I had the new one in. After finding the right end wrenches, I don't think I had more than 10 minutes into the project. Easiest repair I have done on anything in a long time!