342074B (2006-10) Poulan Lawn Tractor - Overview

This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number...Read more to confirm this is the washer you need for your equipment. This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.

The Push Nut is a black, metal nut, which can be installed with pliers and a hammer. It's used to secure parts in place in various locations on a variety of equipment. If damaged will not longer hold in place. Installation is rated as "Easy", but it will depend on the parts your are securing and the equipment you are using. Consult your m...Read moreake, model and diagrams to ensure this is the correct part. The part is sold individually.

E Ring Number 5133-75 is a black, metal ring for securing the position of other parts. If damaged it will become loose or fall off. Installation is rated as "Easy" and is done with a pair of pliers. Refer to your make, model and diagrams to ensure this is the correct part.

This OEM-certified washer provides support, spacing, and reduces friction between parts in your lawn equipment, typically working alongside bolts or screws. This washer has a thickness of 16 gauge and dimensions of 25/32 x 1-5/8 inches. A damaged washer will look deformed or cracked, leading to parts becoming loose or not fitting properly...Read more in your machine. When you remove a broken washer from your machine, you will need pliers or a wrench to loosen the bolt or screw securing it. Once the fastener has been removed, you can pry the washer with a screwdriver. It is important to know that this washer is sold individually. Before adding this replacement part into your cart, check your instruction manual to determine the number of washers your machine needs.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This is an original part from Husqvarna. The hood latch is constructed of flexible plastic, and is made for use with many riding lawn mowers. This component is fastened onto the lower bagger chute, latching it to the upper chute. The hood latch is sold individually. A pair of pliers and a screwdriver may be helpful for the removal and replacement.

This replacement v-belt is a genuine OEM sourced part. It is specially manufactured for use with riding lawn mowers. This is the the belt that is attached to the transmission pulley helping to drive the unit. Over time belts tend to wear out and stretch eventually requiring replacement. Inspect belts periodically and replace them as neede...Read mored to maintain peak performance. This part is made out of strong rubber material and it is sold individually. To complete this repair you will need a set of wrenches.

This metal square key is designed to prevent the rear wheel of your lawn equipment from slipping. Approximately sized at 3/16 x 2, it fits into the groove found on the axle and the hub of the wheel, ensuring proper alignment of the two parts. If the machine becomes hard to turn or maneuver or it makes a grinding or clicking sound, your sq...Read moreuare key may be worn out. Visually inspecting this part for bends and cracks can confirm this. You may also notice that the rear wheel is wobbling or falling off. A worn square key can cause damage to the wheel assembly of the machine, leading to costly repairs or even the need to purchase a new one. To prevent that, you need to replace a broken square key as soon as possible. Replacing the square key is a simple process. After turning your lawn equipment off and letting it cool down, you need to use a jack to lift the rear of it off the ground. Remove the wheel from the axle by using a socket to remove any bolts or nuts holding it in place. With pliers, you can then take the square key off the machine. This replacement part is sold individually and is sourced directly from its original manufacturer.

This is an OEM part sourced directly from the manufacturer. The crownlock nut is commonly found in Craftsman lawn tractors and lawn mowers. This part is made of metal, and is generally used to secure the link on the suspension arm. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure...Read more of ordering the correct part. You will require a wrench when replacing this item. This product is available as an individual replacement part.

It is a genuine OEM sourced replacement screw which is specially designed for use with Husqvarna, Poulan and Ryobi riding lawn mowers and garden tractors. This item is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of ...Read morethis item. It is a high-quality hex head screw which is made of durable metal and it is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Weedeater, Poulan and Husqvarna. This part helps support the shift rod in the correct position on the pivot bracket. It is recommended to review your models diagram to verify the parts compatibility. This spring torsion is sold individually and made of durable material.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.