342054 (2006-03) Poulan Lawn Mower - Overview

This is a genuine replacement part sourced directly from manufacturer. It is designed for use with riding lawn mowers/tractors. The ignition key is inserted into the switch to start the mower. This is a safety feature for unauthorized use of the mower. This part is made out of plastic with metal and it is sold individually.

It is a genuine manufacturer-approved part which is specially designed for use with Poulan, Weed Eater and Husqvarna riding lawn mowers and garden tractors. The purpose of the interlock switch is to act as a safety feature which will shut the engine off if the driver leaves the seat. Unfortunately, over time parts will wear out and it may...Read more begin to fail eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the correct location and installation of this component. Note, this high-quality plastic body switch is sold individually. You may need a screwdriver and pliers to perform this repair.

This lightbulb is supplied by the original manufacturer and intended for use in lawn tractors and riding mowers with a 12-volt system. It is positioned on the front of the equipment as part of the equipment lighting system. The lightbulb illuminates the area allowing for improved visibility when working in low-light conditions. The lightb...Read moreulb can fail due to various reasons, such as burnout, electrical issues, or physical damage. Once the lightbulb stops functioning, visibility will be reduced which makes it difficult to safely operate the equipment. Before you begin the repair, disconnect your equipment from the power source to avoid electrical hazards. Remove the bulb housing cover, and carefully unscrew the old bulb. Thread the new bulb into the housing and ensure that it is securely seated. Finally, reattach the housing cover, reconnect the power supply, and test the new bulb. Note that this bulb is part of a dual usage system, therefore ensure that you order at least two as each bulb is sold individually.

The oil drain valve connects to the easy oil tube drain and the oil pan and helps to drain the oil out of the engine. This part is made out of metal and is available individually. It will need to be replaced if it becomes broken and a set of pliers may be needed when replacing this part. This valve is an original part from Ryobi and Husqvarna for use in ride lawn mowers and lawn tractors.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

This headlight switch is designed for use with various models of ride-on mowers/tractors, features an on/off mode for turning the headlines on and off, and is a genuine OEM part. If your headlights do not turn on, it is recommended that you inspect the light bulbs before replacing this switch. It is recommended that if you have a multimet...Read moreer, you test this switch for continuity prior to ordering a new switch. To replace this switch, lift or gain access to the steering housing of the lawnmower. Locate the tabs securing the switch, which will be underneath where they appear on the user interface panel. Push the tabs on the side of the switch inwards to release the switch out from its panel, and then disconnect the wires from the switch, taking note of their positions. Connect the new switch terminals to the previous wires, push the new switch into its panel, and test the lights to make sure they work.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

This is an authentic OEM part for use with Craftsman Lawn Tractors. The interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. This part is sold individually. The most common reasons for replacing the clutch interlock switch are when the mower won't start or start...Read mores when the brake is not depressed. The tool needed to replace the seat switch plunger is a -+ inch socket.

This is an authentic replacement part sourced directly from the manufacturer. The rectangular ammeter is commonly found in lawn tractors and ride mowers from Ryobi, Husqvarna, Poulan, and Weed Eater. This part is a complete ammeter assembly, which is used to measure the electrical current flowing through the machine. You may require a ...Read morewrench when replacing this item. The rectangular ammeter is available as an individual replacement part.

This is an authentic replacement part that is OEM sourced and intended to be used with lawnmowers from Husqvarna, Poulan, and Ryobi. The durable plastic cap is vented and used to cover the fuel fill spout on the tank. This item does not require tools to install and it is sold as an individual replacement part.

This nylon-insert flange nut is designed for use on outdoor power equipment to securely fasten components exposed to vibration and torque. The built-in flange helps distribute load evenly without the need for a separate washer, while the nylock insert resists loosening during operation. It’s a simple, reliable replacement for maintaining safety, stability, and secure assembly across a wide range of equipment.