340 MTD Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replaced. This is an authentic part authorized by the manufacturer.

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This is a genuine manufacturer-sourced part which is specially designed for use with garden tillers. It is an identical replacement for a missing or damaged right-hand side outer tine assembly that was originally installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and applicat...Read moreion of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This depth bar is a genuine OEM replacement designed for front-tine garden tillers. It mounts at the rear of the tiller and regulates how deeply the tines penetrate the soil, giving the operator consistent control over tilling depth for different ground conditions. Finished in durable powder-black steel for long service life, it’s an idea...Read morel replacement when the original depth stake is bent, worn, or broken, helping restore proper tiller performance and uniform soil cultivation.

This is a MTD and Yard Machines replacement part directly sourced from the manufacturer for use in lawn mowers. The left hand inner tine goes next to the left hand outer tine. It might require a set of pliers and a hammer to replace this item. It will need to be replaced if it breaks or cracks. This part is made of metal and is available individually.

This right-hand inner tine assembly restores proper soil-cutting performance on front-tine rototillers by replacing a bent, worn, or broken tine. Its durable steel construction is shaped to aggressively break up compacted soil, weeds, and turf, helping achieve effective tilling and cleaner seedbed preparation. Suitable for routine mainten...Read moreance or repair, this tine helps maintain balanced tiller operation and consistent cultivation results when one side becomes damaged or excessively worn.

This OEM outer tine assembly is situated on the left side of your tiller, extending from the chain case assembly. It works alongside the inner tine assembly to dig into and break up the soil. Signs of a faulty outer tine assembly include uneven tilling and unusual noises. Look for visible cracks, breaks, or significant wear. A broken tine...Read more will result in decreased performance and potential damage to other components. To remove the existing outer tine, use pliers to detach the pins securing it. If the fasteners are stubborn, apply penetrating oil before attempting to loosen them. This left-hand outer tine assembly is sold separately from the right-hand outer tine and the inner tines.

This is an authentic component which is supplied from the original equipment manufacturer for use with garden tillers. This is the main belt that drives the unit, when installing a new belt, make sure to clean pulleys to ensure top performance and longevity of your new belt. Inspect it periodically and replace when worn or stretched. This part is made of high-quality rubber and is sold individually.

This wheel hanger bracket assembly is designed for rear-tine tillers to support the wheel assembly and maintain proper stability and depth control during operation. Constructed from durable metal with a powder-coated black finish, it provides a secure mounting point for pin-style wheels and helps keep the tiller aligned and steady while w...Read moreorking. It’s a practical replacement for restoring proper wheel support when the original bracket is bent, damaged, or worn.