EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3396 - Overview

Models starting with 3396

Click on the best match to narrow your results.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lawn Mower Hex Head Washer Screw – Part Number: 2828635SM
$7.08
In Stock
Lawn Mower Hex Head Washer Screw
Part #2828635SM
This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.
Carriage Bolt 5/16-18 x 3/4" Lg. – Part Number: 710-0451
$6.40
In Stock
Carriage Bolt 5/16-18 x 3/4" Lg.
Part #710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Lawn Mower Hex Washer Head Screw – Part Number: 710-0599
$6.40
In Stock
Lawn Mower Hex Washer Head Screw
Part #710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.
Lawn Tractor Mandrel Housing – Part Number: 492574MA
$60.85
In Stock
Lawn Tractor Mandrel Housing
★★★★★
★★★★★
(1)
Part #492574MA
This mandrel housing is for lawn tractors. Mandrel housing houses the shaft that spins the blade. Wear work gloves to protect your hands when installing this part.
Control Box-thrott – Part Number: 831-0823A
$42.70
Special Order
Control Box-thrott
★★★★★
★★★★★
(2)
Part #831-0823A
The Throttle Box Assembly, or the Throttle Assembly, is a kit that includes the housing, handle, and hardware. It is black and constructed of steel and plastic. It can be installed onto the right hand upper handle, using a screwdriver and pliers, and is rated as Medium difficulty to install. This kit contains the parts that control the amount of the air and fuel entering the engine. When the part breaks (likely due to fatigue) you will no longer be able to control the engine. If nothing happens when you move the handle, that means it has become disconnected. When the part is broken it must be replaced. Check your model number to ensure you are selecting the correct replacement part.
Lawn Mower Cotter Pin – Part Number: 703312
$6.40
In Stock
Lawn Mower Cotter Pin
Part #703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.
Lawn Mower Solenoid – Part Number: 7701100MA
$31.85
In Stock
Lawn Mower Solenoid
Part #7701100MA
Starter solenoid
Adapter- Blade – Part Number: 92466MA
$14.97
In Stock
Adapter- Blade
Part #92466MA
The Blade Adapter is used to connect the mower blade to the base of the mower deck. The part is individually sold, silver metal, and measures approximately 2 inches in diameter. Installation requires a Wrench or Socket and is rated as "Easy". If damaged (likely due to fatigue and general wear) there maay be a vibration or rattling sound from it coming loose. Refer to your make, model and diagrams to ensure this is the correct part.
Lawn Mower Plastic Flange Bearing – Part Number: 741-0487C
$10.54
In Stock
Lawn Mower Plastic Flange Bearing
★★★★★
★★★★★
(1)
Part #741-0487C
Made of durable silver plastic, this Flange Bearing is an authentic manufacturer-source replacement part for hundreds of models of lawn and garden equipment. It is used to allow a shaft to connect while moving smoothly and freely and is sold individually. When this part malfunctions, you may notice the shaft becomes very sloppy or comes disconnected. To complete this repair, you will need a screwdriver, a socket set, and pliers. Customers rate this repair as Medium difficulty.
Lawn Mower Nut – Part Number: 703409
$8.19
In Stock
Lawn Mower Nut
Part #703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.
Pin, 3/32 X 1.6 – Part Number: 703300
$6.40
In Stock
Pin, 3/32 X 1.6
Part #703300
The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.
Nut – Part Number: 15X100MA
$6.40
In Stock
Nut
Part #15X100MA
The Blade Nut is a 9/16-18" silver, metal nut. This part is sold individually, and requires a wrench and socket to install. Its installation is rated "Easy". This part secures the blade in place and attaches onto the blade shaft. If broken (likely due to fatigue) it may come loose and rattle, causing vibrations. Refer to your make, model and diagrams to ensure this is the correct part.

Exact Part matches for your search term

Screw, Tap 1/4 -18 x .875 – Part Number: 3396
No Longer Available
Screw, Tap 1/4 -18 x .875
This part number matches the current model number 3396
Part #3396
Screw – Part Number: 3396
No Longer Available
Screw
This part number matches the current model number 3396
Part #3396
Screw 1/4-20 X .875 – Part Number: 3396
No Longer Available
Screw 1/4-20 X .875
This part number matches the current model number 3396
Part #3396
Wire black – Part Number: 3396
No Longer Available
Wire black
This part number matches the current model number 3396
Part #3396
Washer - flat – Part Number: 3396
No Longer Available
Washer - flat
This part number matches the current model number 3396
Part #3396
Washer – Part Number: 3396
No Longer Available
Washer
This part number matches the current model number 3396
Part #3396
CONVEYOR – Part Number: 3396
$108.28
Special Order
CONVEYOR
This part number matches the current model number 3396
Part #3396

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Mixer began to make a noise on speed two and higher
8 of 31 people found this instruction helpful.
  • LISA M from BATESVILLE, AR
  • Really Easy
  • Less than 15 mins
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do es not make the slight howl sound.
Was this helpful?
Thank you for voting!