This is an authentic OEM self-tapping bolt used on Toro snow throwers/blowers. It is designed to secure the bushing/gear case assembly together. By using a wrench and a self tapping bolt, precisely fitted threads are created in the opening of the case. This allows for the two part to be secured tightly together. Please note this bolt is sold individually.
This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.
This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.
This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more models part diagram to confirm the washers compatibility and usage. The flat washer is priced individually.
It is an authentic OEM part that is specially made for use with Toro and Lawn Boy snowthrowers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. It is one of the screws utilized to secure the upper and the lower handles. This high-quality component is made of durable metal and is sold a...Read mores an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench will be needed to perform this repair.
This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.
This item has been sourced from the original manufacturer to ensure quality. The metal screw is intended to be used with snowthrowers from Toro and Lawn-Boy. This screw is used to secure the bearing flange to the side of the auger housing. The screw is priced as a single item.
The Pivot Washer is an individually sold metal silver washer that alows the wheel adjust to pivot on your equipment. You will be able to tell when it breaks when the your part appears damaged or jams up when adjusting, which may happen over time due to regular wear. When the part is damaged it should be replaced. The new washer will attac...Read moreh to the spring arm assembly behind the level.
This is an easy repair that requires a wrench or a socket to carry out.
This OEM Ignition Key is a black, plastic and metal part used to start your engine.
It is rated as easy to use, and is sold individually. It must be replaced if lost, or if it gets worn down over time. It is used with the ignition switch.
This is a genuine Toro replacement part. The lock washer is designed by the manufacturer for use in snow throwers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering...Read more the correct part. You will require a wrench when replacing this item. This part is sold individually.
This replacement crock is an authentic manufacturer sourced part that is specially produced for use with Hamilton Beach slow cookers. It is a black crock that is made from durable ceramic and it is sold individually. This is the item that fits inside the food warmer to hold and cook the food.