This manufacturer sourced carbon brush is a genuine replacement part, not an aftermarket equivalent. It is specially produced for Porter Cable and Delta saws. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. When replacing brushes it is a good idea to inspect your armat...Read moreure for burns, cracks, or other damage which can indicate other issues with the motor. It is recommended to replace both brushes at the same time. This item includes one carbon brush with a lead wire and a spring attached. Please note, brush holders are sold separately. Replacing this carbon brush you will need a screwdriver to get the job done. • Ensure the saw is unplugged • Remove screws that secure the cover • Remove the motor housing • Remove the old brush • Install the new brush • Reassemble and test the saw
This is an OEM part sourced directly from the manufacturer. The screw is designed for use in power tools from Delta, Porter Cable, and Black & Decker, such as table saws, miter saws, and contractors saws. This part is made of metal, and may be found in various locations in the machine depending on model. Please be aware that there are ...Read moredifferent screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this part. This item is sold individually.
This is an original Delta replacement part manufactured for use with drill presses and table saws. The special hex nut has multiple applications depending on the model drill press or table saw. This hex nut is sold as an individual replacement part, please see model diagram for part location and usage.
This is a genuine Delta replacement part that is used with drill presses, shapers, scroll saws, and trim saws. The special nut is used with several different machines and its application can vary based on the model of the equipment. The special nut is sold individually, a hex socket and wrench may be required to install this item.
This is an authentic HHHH replacement part, sourced from the original manufacturer for use with sanders, grinders, radial arm saws, routers, lathes, scroll saws, and boring machines. The metal nut is used with several different types of equipment and the application of the nut can vary based on the model of the machine. The nut is sold as an individual replacement part.
This is a genuine manufacturer sourced replacement part used on Delta and Black and Decker equipment. It helps to distribute the pressure evenly and provide a tight seal between connected components. This is a standard hardware which may have multiple applications. For the exact location please refer to the diagrams of your specific model. This part is made of high-quality metal and is sold individually.