328796550 Craftsman Edger - Overview

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

Inside some rear-engine riding mowers, a friction ring helps the clutch transfer power smoothly into the drive system. A glazed, cracked, bent, or badly worn ring can cause delayed movement, slipping, uneven takeoff, or loss of drive even while the engine runs normally. Check tire pressure, belt condition, cable adjustment, and the mating...Read more drive plate before choosing a replacement. Oil on the ring can also reduce grip. Match the replacement to the full equipment model and product number. Before service, turn off the engine, remove the key, disconnect starting power, and support the mower safely. Clean the contact area and follow the service diagram during installation.

This is an original replacement part manufactured for use with Craftsman snow throwers. The special bolt is used to secure the auger blade to the axle. The bolt is used as a safeguard if the blade gets caught or stuck the force will snap the bolt rather than breaking more expensive parts like the auger transmission. The bolts are sold in ...Read morepairs and include the nuts and washers, the bolt sets are sold as individual sets.

Enhance the effectiveness of your lawn tractor with this 28-inch high-lift blade from Snapper. This unique component is specifically designed for cutting and bagging, ensuring your lawn is trimmed evenly and looks professionally maintained. Notably, this blade's high-lift design aids in making your mowing task smoother and less laborious,...Read more significantly improving your tractor's cutting capability. Despite its robust functionality, installing this part is a breeze. However, it is recommended to wear work gloves during the installation process for added safety. Trust the brand of Snapper to deliver a high-quality, durable blade to keep your lawn looking pristine.

This is a genuine OEM sourced replacement v-belt, it is specially produced for use with Murray, Simplicity and Snapper lawn mowers. It is the main deck belt that drives the blades, over time belts tend to wear out and may stretch eventually requiring a replacement. Clean pulleys before installing the new belt to ensure top performance and...Read more longevity with your new belt. Please note this high-quality part is made of durable rubber and is sold individually.

This is a genuine OEM sourced replacement belt which is specially designed for use with Murray, Simplicity and Snapper lawn mowers. It is the main deck belt which helps to rotate mower blades, over time it may wear out and begin to crack eventually requiring a replacement. Please note this high-quality rubber belt is sold individually.

Blade 19