326AI25 Husqvarna Auger - Overview

This air filter comes in black foam and is rated as "Easy" to install. Installation requires a screwdriver, and the part attaches inside of the air cleaner housing. This manufacturer certified filter is used to prevent dirt and debris from entering the carburetor and engine, which would cause damage. If broken or clogged, the engine will ...Read moreexperience performane issues or may not turn on. If broken, the filter should be replaced. Tip: Put a bit of two-cycle oil in the bag and let it absorb into the filter. This makes it more tacky to catch debris.

This is a genuine OEM part. The Husqvarna choke control is made for use with many lawn and garden trimmers. The plastic component is fastened to the carburetor, allowing the operator to manage the engine's fuel and air mixture. A hex key and a wrench may be required for making the repair. The choke control is sold individually.

This Carburetor Gasket provides a tight seal between the carburetor and insulator. If broken, the engine will run lean due to excess air causing performance issues, and the part should be replaced. If the carburetor has to be taken off for any reason, the gasket should be replaced, as it is one-time use. Installation requires a screw driver and pliers, and is rated as "Easy".

This is an authentic Husqvarna replacement screw that is commonly used on a variety of chainsaws, trimmers and brushcutters. It is a standard hardware which has multiple applications depending on your tool. Always make sure to check appropriate diagrams for correct location and use of this part. Please note, this screw has a hex socket head and it is sold individually.

It is an authentic OEM sourced hardware that is commonly utilized on Husqvarna handheld trimmers and blowers. This screw has multiple applications depending on unit, to ensure correct use of this hardware please make sure to check appropriate diagrams. Please note this hex socket head screw is sold individually.

This is a genuine Husqvarna replacement part that is intended to be used with trimmers, hedge trimmers, pole saws, and brushcutters. Fuel additives can clog the carburetor causing the engine to not idle correctly or it can prevent the engine from starting up. This kit includes the recommended part to replace when cleaning and rebuilding the carburetor.

This screw is an authentic OEM part which made for Husqvarna chainsaws. It is designed for multiple uses based on your tool. Please refer to diagrams for correct location and applied use of this screw. It includes one (1) metal screw per order. This is a hex head item so you would need a hex key/allen wrench to install or remove it.

This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap y...Read moreour spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install this component.

This is a genuine OEM sourced part used on many brushcutter devices. The ignition module mb50 is designed to send electrical current to the spark plug. Constructed of high-quality metal, wiring and rubber, this item is sold individually. An Allen wrench and a pair of pliers are necessary for making the replacement. It is encouraged to refer to the manual for safety and repair instructions.

The handle attaches to the clamping sleeve and is made of plastic. This is a genuine Husqvarna and Jonsered replacement part for use in trimmers, saws, and brushcutters. This item is available as an individual replacement part. During replacement, it may require a wrench to help install this part correctly. Over time this part may break and will need to be replaced.

This is a genuine Husqvarna part for use with Hedge Trimmers, Brush Cutters, Trimmers, Pole Saws, and Edgers. The Engine flywheel 537249602 attaches to the crankshaft behind the recoil starter assembly. The recoil starter engages the flywheel to spin and start the engine. The most common reason for replacing the flywheel is if the engine ...Read morewon't turn. This part is sold individually. The tools that you will need to replace the flywheel is a T25 Torx bit, spark plug wrench, clutch tool, rope, T20 Torx bit and two flat-head screwdrivers.

This is an authentic replacement part manufactured for use with lawn and garden power equipment. Fuel left in carburetors can clog passageways preventing fuel from entering the engine. Clogged carburetors can cause abnormal idling, can shut off the engine after running, or can prevent the engine from starting. The carburetor can be cleane...Read mored if it is clogged and these gaskets will need to be replaced when servicing the carburetor. The gaskets are sold as a set and the sets are sold individually.