EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

323S Husqvarna Sprayer - Overview

Models starting with 323S

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lawn Mower Ring Clip – Part Number: 812000029
$6.72
In Stock
Lawn Mower Ring Clip
★★★★★
★★★★★
(1)
Part #812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Lawn Mower Washer – Part Number: 532121749
$6.72
On Order
Lawn Mower Washer
★★★★★
★★★★★
(2)
Part #532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number to confirm this is the washer you need for your equipment. This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.
Ground Drive Fixed Idler Pulley – Part Number: 532194326
$28.55
In Stock
Ground Drive Fixed Idler Pulley
Part #532194326
This V-groove idler pulley helps maintain proper tension on the mower’s drive belt, allowing smooth and reliable forward and reverse movement. Designed with a grooved profile to securely guide the belt, it supports consistent traction and reduces slippage during operation. With an approximate 3.5-inch diameter and 3/8-inch bore, and built with a durable construction and sealed bearing, it is made to withstand wear and vibration. Replacing a worn or damaged pulley can restore proper belt tension and improve overall drive performance.
Flat Idler Pulley – Part Number: 532194327
$26.35
In Stock
Flat Idler Pulley
Part #532194327
This flat idler pulley is a genuine OEM replacement part for use in outdoor power equipment. It is made of plastic and features a metal bore adapter, and a radial-style single row bearing. The pulley has an outside diameter of 3.5 inches and a height of approximately 1.5 inches. The pulley is responsible for maintaining tension on the drive belt, which allows power to transfer from the engine to the transmission. It also keeps the belt in position and acts as a shock absorber to minimize stress on the belt. If the idler pulley is damaged or worn down the drive system will likely not work, and the belt may slip off or tear, resulting in a loss of engine power. To access the pulley, you will first need to remove the belt. Disconnect the old pulley and place the new one in position. Once the new pulley is secure, you can rethread and tension the belt, making sure to follow your equipment specifications.
Lawn Mower Hardened Washer – Part Number: 532188967
$6.72
In Stock
Lawn Mower Hardened Washer
Part #532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and will need to be replaced. You may notice this part is damaged if you start hearing a grinding or rubbing noise between the tire rim and ring clip. You will need a pair of needle nose pliers to carry out this repair, which our customers generally found easy. You will locate the washer on the spindle, between the wheel and the ring clip.
Handle Parking Brake – Part Number: 532196439
$17.55
In Stock
Handle Parking Brake
★★★★★
★★★★★
(1)
Part #532196439
This parking handle is an original part from Craftsman for lawn tractors and riding mowers. This part connects to the brake rod for putting on the parking brake. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable plastic and sold individually.
Bowtie Cotter Pin – Part Number: 532194209
$6.72
In Stock
Bowtie Cotter Pin
Part #532194209
This is a Genuine Manufacturer Sourced replacement part used on a Riding Lawn Mowers/Tractors. This part is made out of Metal and it is Sold Individually. These pins anchor various assemblies by insertion through a drilled hole in a shaft or bolt and then spread the points to hold the assembly into position.
Lawn Mower E-Ring – Part Number: 812000001
$6.72
In Stock
Lawn Mower E-Ring
★★★★★
★★★★★
(1)
Part #812000001
E Ring Number 5133-75 is a black, metal ring for securing the position of other parts. If damaged it will become loose or fall off. Installation is rated as "Easy" and is done with a pair of pliers. Refer to your make, model and diagrams to ensure this is the correct part.
Lawn Mower Washer – Part Number: 532121748
$6.72
In Stock
Lawn Mower Washer
Part #532121748
This OEM-certified washer provides support, spacing, and reduces friction between parts in your lawn equipment, typically working alongside bolts or screws. This washer has a thickness of 16 gauge and dimensions of 25/32 x 1-5/8 inches. A damaged washer will look deformed or cracked, leading to parts becoming loose or not fitting properly in your machine. When you remove a broken washer from your machine, you will need pliers or a wrench to loosen the bolt or screw securing it. Once the fastener has been removed, you can pry the washer with a screwdriver. It is important to know that this washer is sold individually. Before adding this replacement part into your cart, check your instruction manual to determine the number of washers your machine needs.
Lawn Mower Clear Zinc Washer – Part Number: 819191912
$6.72
In Stock
Lawn Mower Clear Zinc Washer
Part #819191912
This authentic manufacturer sourced replacement washer is specially made for use with riding lawn mowers/tractors. Its purpose is to redistribute the pressure evenly between two connected parts. This allows for tighter and more secure grip. This is a standard hardware which has multiple uses based on your equipment. Please make sure to check appropriate diagrams for correct location and application. This part is made out of metal and it is sold individually.
Lawn Mower Flangelock Hex Nut – Part Number: 532409149
$6.72
In Stock
Lawn Mower Flangelock Hex Nut
Part #532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To replace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.
Lawn Mower Key – Part Number: 532123583
$6.72
In Stock
Lawn Mower Key
Part #532123583
This metal square key is designed to prevent the rear wheel of your lawn equipment from slipping. Approximately sized at 3/16 x 2, it fits into the groove found on the axle and the hub of the wheel, ensuring proper alignment of the two parts. If the machine becomes hard to turn or maneuver or it makes a grinding or clicking sound, your square key may be worn out. Visually inspecting this part for bends and cracks can confirm this. You may also notice that the rear wheel is wobbling or falling off. A worn square key can cause damage to the wheel assembly of the machine, leading to costly repairs or even the need to purchase a new one. To prevent that, you need to replace a broken square key as soon as possible. Replacing the square key is a simple process. After turning your lawn equipment off and letting it cool down, you need to use a jack to lift the rear of it off the ground. Remove the wheel from the axle by using a socket to remove any bolts or nuts holding it in place. With pliers, you can then take the square key off the machine. This replacement part is sold individually and is sourced directly from its original manufacturer.

Common Symptoms of models starting with 323S

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
20 of 32 people found this instruction helpful.
  • Lynn from BOILING SPGS, PA
  • A Bit Difficult
  • 30 - 60 mins
  • Socket set
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it function s properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Was this helpful?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
7 of 19 people found this instruction helpful.
  • Gary from PILESGROVE, NJ
  • Very Easy
  • Less than 15 mins
Just described it.
Was this helpful?
Thank you for voting!
Husqvartna LGT-48DXL transmission drive belt was worn out
5 of 14 people found this instruction helpful.
  • Daniel from WYTHEVILLE, VA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
ALL VIDEOS and the official Husqvarna instructions will tell you that you MUST remove both the mowing deck and the entire clutch pulley assembly to switch the transmission drive belt. This is NOT true. It takes some effort and tight maneuvering, but this job can be done relatively quickly without removing either. You do NOT have to rem ove the mowing deck! You do NOT have to remove the clutch pulley assembly! What I did was to stand the tractor up nearly vertical, resting it against a golf cart I have and tying it in place for safety. Then, you have to loosen two black belt guides right by the clutch pulley assembly. I did NOT remove them, just left them hanging loose. Next, there is a silver bar that comes in from the outside of the mower chassis and attaches directly to the clutch, remove this entirely. Next, there is an electrical cord assembly in the way, trace this back, find where it plugs in, and unplug it. Next, in order to be able to slide the belt fully over the clutch pulley assembly, you have to take the mower deck belt off of JUST THE ONE spindle closest. I tie wrapped it in place after getting it off the spindle so that I could easily put it back onto the spindle as the last step when done. Once the mowing deck belt is off the closest spindle, you can then slide the drive belt completely over the clutch pulley assembly. You can then easily remove the entire drive belt, taking note (I took pictures) of how it is routed. Then, just reverse all of this. I began by fitting the drive belt over the clutch pulley assembly to make sure that end was correct. I then put the previously mentioned two guides, silver bar, and electrical cord back in place. Next, I shoved the belt down where it goes, working it down towards the transmission and routing it correctly. Of course, it is a little difficult with the limited space available, but I would rather do that then needlessly take the entire mowing deck off. You finally have to CAREFULLY slide it over the PLASTIC fan blades on the transmission. Once past those, it slides easily in place. The last step is to put the mowing deck belt that you previously removed and tie wrapped in place back onto the spindle. That's it! Only takes about 30-45 min. done this way.
Was this helpful?
Thank you for voting!