This is a shear bolt, also known as a snap-off bolt. This is a fastener designed to break under a specific amount of pressure and protect the machine it is installed on from that excessive load. In lawn equipment, the shear bolts typically connect the auger or blade to the drive shaft. Therefore, if the bolt snaps, the auger gets jammed a...Read morend cannot rotate so that it will not damage the rest of the unit. This bolt has a diameter of 5/16 inches, with 18 threads per inch, and is 1.5 inches long. To remove the shear bolt from your machine, you need to turn the power off first. With pliers or a wrench, grip onto the broken end of the bolt and twist it gently out of its hole. If it is stuck, you may need to coat the bolt with a penetrating oil or tap the bolt out with a mallet. Since this authentic OEM part is sold individually, refer to your instruction manual so that you can purchase the correct number of bolts for your machine.
This Slide Shoe is rated as "Easy" to install and requires a wrench set. It is a manufacturer-approved part that comes in black and is constructed of metal. The part is used to help the snowblower slide smoothly and is attached on the side of the augur housing. If missing or broken, it should be replaced.
This is an authentic OEM sourced replacement part designed for use with snow throwers/blowers. It allows you to engage and disengage the unit. This cable is sold individually. You may need pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the ...Read morecontrol handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
This is a genuine OEM sourced part that is not part of a kit or assembly and is sold individually. This Spring Extension, or Extension Spring, serves a variety of purposes, depending on your model. It is black, made of metal, and may be found in multiple locations on your machine.
This part needs to be replaced when it is worn, weak, dam...Read moreaged, or broken. Depending on its purpose, you may no longer have control of your machine when the spring breaks. You will need pliers to complete this repair.
Customers rate this repair as Easy.
An extension spring is designed to add tension and resistance to different components throughout lawn and garden equipment. This extension spring, also known as an idler spring, is designed for use with the auger within different makes of various lawn and garden equipment like lawnmowers and snowblowers. This spring is approximately 2.5-i...Read morenches long when completely wound and is made of high-quality metal. If you notice that the lever that connects to the auger is loose or has significantly less tension than normal, this spring could be broken or have lost its level of tension, meaning it needs replacing. To replace this spring, you may need a set of pliers, but you simply remove the frame cover over the spring, pull it away from the auger, and carefully pull it off. Then, simply replace that old spring with the new spring.
This metal flange bearing is an authentic manufacturer-sourced component which is designed for use in lawn and garden outdoor equipment. It is bronze in color, with 6 six flat sides, and it has an inner diameter of 0.75 inches, and a height of 1 inch. It also features a protruding circular rim on one end, known as a flange, which keeps th...Read moree bearing stable and secure. The bearing serves as a support mechanism, allowing rotating parts to move smoothly with minimal friction. Over time the bearing may wear down, crack, or fall off causing excessive noise, reduced performance, and potential damage to the snowblower impeller or auger. Use a bearing puller tool to pry the bearing off the equipment. Align the new flange bearing with the mounting holes and secure it in place.
This authentic part is supplied by the original equipment manufacturer and is specially designed for use with snowblowers. The extension spring is utilized to apply tension on the auger belt idler arm. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality extension spri...Read moreng is made of durable metal and is sold individually. Make sure to check the diagrams for your model to ensure the proper repair procedure.
It is an authentic replacement part that is supplied by original equipment manufacturer, it is specially designed for use with snowblowers. This is the cover for the belt to protect it and the pulleys from dirt and debris. It is made from durable, high-quality plastic material and it is sold individually.
This special jam nut is sourced directly from the original equipment manufacturer for use with MTD and Ryobi lawn and garden equipment. It is a standard hardware which has multiple applications depending on your tool, please refer to appropriate diagrams for correct location and use of this part. It is made of high-quality metal and it is sold individually.
It is a genuine item that is supplied by the original manufacturer for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected components. It is a standard hardware which may have multiple applications. This part provides an identical replacement for a damaged or a m...Read moreissing hardware that was installed on a new unit. Check the diagrams for your specific model for the exact location and the correct application of this flat washer. Note, it is made of durable metal and is sold individually.
The grease seal fits onto the worm shaft and next to the bearing-flange and helps to stop the oil from leaking. This genuine item is supplied by the original equipment manufacturer for use with snow throwers and snowblowers made by Ryobi, MTD, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Cub Cadet. It is made of plastic and is sold ind...Read moreividually. A screwdriver, set of pliers, a socket set, and a wrench set may all be necessary during the installation of this part. It may become broken and will need to be replaced.