EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31BM73TS710 (2010) Cub Cadet Snow Blower - Overview

Diagrams for 31BM73TS710

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Shear Pin, .25 – Part Number: 738-04124A
$6.40
In Stock
Shear Pin, .25
Part #738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.
Pin-bow Tie Cotter – Part Number: 714-04040
$6.40
In Stock
Pin-bow Tie Cotter
Part #714-04040
Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a kit or assembly and is sold individually. It is silver, made of metal, and is used in a variety of models for various purposes. This part needs to be replaced when it is broken or damaged, or the threads have become stripped. Depending on their location, this part is known to wear with regular use. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.
Lawn Mower Self-Tapping Screw – Part Number: 710-04484
$6.40
In Stock
Lawn Mower Hex Washer Head Screw – Part Number: 710-0599
$6.40
In Stock
Lawn Mower Hex Washer Head Screw
Part #710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.
Nut-flglk 5/16-18 – Part Number: 712-04063
$6.40
In Stock
Nut-flglk 5/16-18
Part #712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.
Lawn Mower Flanged Lock Nut – Part Number: 712-04065
$6.40
In Stock
Lawn Mower Flanged Lock Nut
Part #712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be located in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.
Nut-flglk – Part Number: 712-04064
$6.40
In Stock
Nut-flglk
★★★★★
★★★★★
(1)
Part #712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locations. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.
Cable-clutch X 39. – Part Number: 946-0898
$39.83
In Stock
Cable-clutch X 39.
★★★★★
★★★★★
(1)
Part #946-0898
This is an authentic OEM sourced replacement part designed for use with snow throwers/blowers. It allows you to engage and disengage the unit. This cable is sold individually. You may need pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the control handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable
Fuel Bowl O-Ring – Part Number: 951-11589A
$10.83
In Stock
Fuel Bowl O-Ring
Part #951-11589A
This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.
Snow Blower Auger Clutch Cable – Part Number: 946-0897
$32.23
In Stock
Key-ignition Switc – Part Number: 951-10630
$9.32
In Stock
Key-ignition Switc
★★★★★
★★★★★
(1)
Part #951-10630
This key a genuine manufacturer-sourced replacement part for use with outdoor equipment. They key is inserted into the ignition to power on the equipment. It is made of durable plastic and is approximately 1 inch wide and 2.25 inches long. You will need a replacement key if yours is broken or lost. Each key is sold individually.
Screw Hex.wash.hd – Part Number: 710-1652
$6.40
In Stock
Screw Hex.wash.hd
Part #710-1652
This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is used with different types of machines and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part.

Common Symptoms of the 31BM73TS710

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The chute rotation assembly was stuck
4 of 6 people found this instruction helpful.
  • Ralph from SALT LAKE CTY, UT
  • Very Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part. They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Was this helpful?
Thank you for voting!
Carburetor rebuild
3 of 6 people found this instruction helpful.
  • Jason from PEABODY, MA
  • Very Difficult
  • More than 2 hours
I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- [email protected]
Was this helpful?
Thank you for voting!
Original cable laid on muffler and melted plastic into the cable housing, seizing cable.
1 person found this instruction helpful.
  • Jim from Woodbridge, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Only part of repair that took a few seconds was making sure the blower chute moved fully to the right and left. Lucky, the fix is remove cotter pin on the hex shaft, move handle and chute fully to the right or left reinstall hex, check for full swing, replace cotter pin. The cable end is barbed, but can be removed with a twisting pull.
Was this helpful?
Thank you for voting!