Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 31AM63LF704

31AM63LF704 (2008) MTD Snow Blower - Overview

Get Parts and Repair Help for 31AM63LF704

If you know the snow blower repair part you need, you can browse the list of all parts on the 31AM63LF704, or you can search by name or part description. You can also find your part by where it is located on the 31AM63LF704 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 31AM63LF704

[Viewing 7 of 7]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

TT Screw 1/4-14 x .625


Fl-Wash. .75" I.D. X 1.25" O.D. X .06


Pin-Shear .25


Nut, Flange Lock, 3/8-16, Grf


Fl-Idler Pulley 2.75" O.D.


Auger Clutch Cable, 47.23"


Star Knob 5/16-18


Hex Bolt 1/4-20 x .62"


Nut, Flange Lock, 5/16-18, Grf


Hairpin Clip

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Original shave plate badly worn

  • Customer: John from HARRISVILLE, NH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench set
  • 1 of 1 people found this instruction helpful
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, apply heat with a torch... read more