This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location.
While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations.
Customers rate this repair as Easy.
This part is sold by color. Please see color options below to see what part number you need to order. Color: Majestic Orange. Part Number: 790-00121-0606. Color: Powder Black. Part Number: 790-00121-0637. Color: MTD/Troy-Bilt Red. Part Number: 790-00121-0638. Color: Red Metallic. Part Number: 790-00121-0650. Color: Oyster Gray. Part ...Read moreNumber: 790-00121-0662. Color: Polo Green. Part Number: 790-00121-0689. Color: Black Jack. Part Number: 790-00121-0691. Color: Mastercraft Green. Part Number: 790-00121-0709. Color: Sears Red. Part Number: 790-00121-4044. Color: Cub Yellow-2. Part Number: 790-00121-4021. Color: Fint Mica. Part Number: 790-00121-4033. Color: Pure Orange. Part Number: 790-00121-4041.
This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality shave plate is ...Read moremade of durable material and is sold individually. Keep in mind the hardware to secure it is sold separately.
Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance.
The primer bulb plays a crucial r...Read moreole by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually.
Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.
This is a genuine replacement part sourced directly from the manufacturer. The shave plate is commonly found on snowblowers from MTD and Yard Man. This part is made of metal, and is used at the base of the spiral housing to scoop snow up from the ground into the blower. You will require a wrench when replacing this part. This item is sold individually.
This is an authentic replacement part manufactured for use with Ryobi snowthrowers. The grease plug is commonly used to seal the oil port on the augers gearcase assembly. This grease plug is available as an individual replacement part, please see model diagram for associative parts.
This item has been sourced from the original manufacturer to be used with snowthrowers from Yard Machines, MTD, Troy-Bilt, and Yard-Man. The metal skid shoe attaches to the side of the auger housing. The shoe is used to allow the housing to slide over the ground and to set the height of the auger assembly. This item is sold individually.
This is an authentic replacement part manufactured for use with outdoor power equipment. The plastic fuel cap includes the seal to prevent spillage. The cap features an ergonomic grip, and is easily installed, no tools are required. Please note the fuel cap is sold individually.
This is a genuine replacement part that has been sourced from the original manufacturer to be used with snowthrowers from Yard Machines, Yard-Man, Troy-Bilt, and MTD. The carburetor assembly connects to the insulator and is used to supply the engine with a mixture of air and fuel. This item is available as an individual replacement part.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original shave plate badly worn
12 of 25 peoplefound this instruction helpful.
John from HARRISVILLE, NH
Really Easy
Less than 15 mins
Wrench set
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read morely heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.