EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31AM2N1B700 (2009) Yard Machines Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Carriage Bolt 5/16-18 x 3/4" Lg. – Part Number: 710-0451
$6.40
In Stock
Carriage Bolt 5/16-18 x 3/4" Lg.
Part #710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Spiral Crescent – Part Number: 735-04032
$26.33
On Order
Spiral Crescent
Part #735-04032
This is a Genuine OEM Approved replacement part designed for use with Snow Throwers. This part is made out of Rubber and it is Sold Individually. This part mounts with 2 Screws (Sold Separately) at each end. You would need a Wrench to replace this part • Remove the ignition key • Disconnect spark plug • Tilt Snowblower back so it rests on it's handles for support • Remove all 4 bolts on the auger paddle and then remove the paddle • Install the new auger paddle into the bracket on the auger shaft • Make sure that the auger paddles are secure
Wiong Nut – Part Number: 720-0279
$7.04
In Stock
Wiong Nut
Part #720-0279
This is a type of handle with a knob-shaped grip used in a variety of lawn and garden tools with adjustable features. This genuine OEM part is 0.8 x 0.2 x 1 inches and is made from plastic. It is designed to connect and disconnect individual parts together without using any tools. By loosening the knob, you can easily adjust the height of the handles on your equipment to your liking as well as fold the handles for proper storage. Over time the handle knob can wear down or break. If this happens, you will need to unscrew the knob and remove the old rope guide before you can place the new knob on. Place the new rope guide in position, thread the eye of the cable through the eye hook loop and finally thread the new knob on to the shaft and turn it clockwise with your hands until it is secure.
Shave Plate – Part Number: 731-1033
$67.54
In Stock
Shave Plate
Part #731-1033
Screw, Hex – Part Number: 710-0896
$6.40
In Stock
Screw, Hex
Part #710-0896
This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Keep in mind this high-quality part is made of durable metal and is sold individually.
Bolt - M6 X 12 Zin – Part Number: 710-04915
$6.84
Special Order
Bolt - M6 X 12 Zin
Part #710-04915
This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may also find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.
Rope Guide – Part Number: 710-1205
$6.40
In Stock
Rope Guide
Part #710-1205
This is an original replacement part manufactured for use with walk-behind lawnmowers. The metal rope guide mounts to the side rail of the handle, and is secured by a handle knob. The rope guide keeps the starter rope on the upper handle for ease of access, and to keep the rope out of the way while operating. The rope guide is sold individually.
Wheel Cap – Part Number: 726-0299
$12.59
In Stock
Wheel Cap
Part #726-0299
The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.
Roller: Cable – Part Number: 756-0625
$13.08
In Stock
Roller: Cable
Part #756-0625
This is an authentic part that has been sourced from the original equipment manufacturer for be used with lawn and garden equipment. The part helps to support and guide the cable. It is an identical replacement for a missing or a damaged component that was installed on a new unit. Keep in mind this high-quality cable guide is sold as an individual item.
Bolt-carriage 1/4- – Part Number: 710-0134
$6.65
In Stock
Bolt-carriage 1/4-
Part #710-0134
This is an original Craftsman replacement part. The carriage screw is designed by the manufacturer for use in snowblowers and lawn tractors. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.
V-belt – Part Number: 954-04204
$30.32
Special Order
V-belt
Part #954-04204
This replacement v-belt is a high-quality component which is sourced directly from the original equipment manufacturer for use with walk-behind snowblowers. This is the main deck belt that drives the augers, over time it may wear out and stretch eventually requiring a replacement. Make sure to clean the pulleys before installing the new belt to ensure top performance and longevity with your new belt. This high-quality v-belt is made of durable rubber material and it is sold individually.
Spacer-Shoulder – Part Number: 748-0234
$6.91
In Stock
Spacer-Shoulder
Part #748-0234

Watch our pros, then fix it yourself.