Models
>
31AH54Q6766
31AH54Q6766 ((2017)) Troy-Bilt Snow Blower - Overview
Sections of the 31AH54Q6766
[Viewing 18 of 18]Keep searches simple, eg. "belt" or "pump".
Auger Cable
PartSelect #: PS12685355
Manufacturer #: 946-04230B
Snow blower clutch cable. The clutch cable engages the snow blower's auger. If the cable is broken, the auger won't turn.
$23.53
In Stock
Auger Drive Belt, 4-Way Large Block
PartSelect #: PS10035478
Manufacturer #: 954-04195A
$37.35
In Stock
Bushing, flange, .80 id x .91 od
PartSelect #: PS12491418
Manufacturer #: 741-0493C
No Longer Available
Handle Panel Assembly - Not used in this application
PartSelect #: PS10031542
Manufacturer #: 931-04181A
No Longer Available
Splined Carriage Screw, 5/16-18 x 1.0
PartSelect #: PS9453142
Manufacturer #: 710-0276
No Longer Available
Questions And Answers for 31AH54Q6766
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Steering Trigger on right side
If the trigger is broken on the left side, it is really easy to replace, if broken on the right side like mine the snow chute joystick control is in the way. Just remove the cover under the joystick and then the large nut under the joystick then you will be to push the joystick down giving you access to the pin that holds the steering tri
... Read more
gger.
Read less
Parts Used:
-
Jeffrey from MASSAPEQUA, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The chute rotation assembly was stuck
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part.
... Read more
They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Read less
Parts Used:
-
Ralph from SALT LAKE CTY, UT
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!