This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location.
While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations.
Customers rate this repair as Easy.
This shoulder screw is sourced directly from original equipment manufacturer. It is an authentic item specially designed for use with a variety of lawn and garden equipment. It is commonly used to secure the upper and lower handles together. Please make sure to check appropriate diagrams for your unit to verify location and application of...Read more this screw. This part is made out of metal and it is sold individually. Please note, the locknut is sold separately. You will need a wrench when installing or removing this shoulder screw.
Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance.
The primer bulb plays a crucial r...Read moreole by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually.
Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.
This is a genuine Yard Machines, MTD and Troy-Bilt part for use with Snow Blowers. The recoil starter assembly houses the rope and the spring-loaded gear that starts the engine. This part is sold individually. The most common reason for replacing the recoil starter is if the rope or spring breaks, causing the engine to not start. The tool...Read more that you will need to replace the recoil starter assembly is a 3/8" socket and a 5/16" socket.
This flange bolt is a genuine OEM replacement fastener designed for use in a variety of lawn and outdoor equipment. It is 10mm long, with a diameter of 6mm, and a 1-millimeter thread pitch. It has a strength rating of 8.8 and it is used to secure various components together and ensure their stability during operation. The bolt has a hexag...Read moreonal-shaped head for easy gripping and a protruding outer rim at its base known as a flange. This flange helps to evenly distribute the load of the fastener and prevent damage to the mounting surface during tightening. It is recommended to inspect all the bolts on your equipment and if you note that any of them are cracked, corroded or the threads are worn down, you will need to replace them. Use a wrench to unthread the faulty bolts and install the new bolts into the mounting holes. Be careful not to overtighten your bolt(s) as you may risk damaging the equipment and stripping the bolt threads. Each bolt is sold individually.
This is an authentic manufacturer made replacement part which is specially designed for use with Yard Machines, MTD, Troy-Blit, and Yard-Man snowblowers. When the recoil starter handle is pulled, the starter rope rotates the starter pulley causing the engine turn fast enough to generate a spark to ignite the fuel in the chainsaw. This par...Read moret is made of durable plastic and is sold individually. For instillation you will need a screw driver and a pair of needle nose pliers.
This replacement part is an authentic manufacturer-sourced component which is specially designed for use with snowthrowers. It is mounted to the lower chute to help direct the snow away from the unit. This part is made of high-quality plastic material and it is sold individually, please note the hardware to secure it is sold separately.