31A-2M1A731 (2010) Husky Snow Blower - Overview

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

This is a Genuine OEM Approved replacement part designed for use with Snow Throwers. This part is made out of Rubber and it is Sold Individually. This part mounts with 2 Screws (Sold Separately) at each end. You would need a Wrench to replace this part • Remove the ignition key • Disconnect spark plug • Tilt Snowblower back so it...Read more rests on it's handles for support • Remove all 4 bolts on the auger paddle and then remove the paddle • Install the new auger paddle into the bracket on the auger shaft • Make sure that the auger paddles are secure

This replacement v-belt is a high-quality component which is sourced directly from the original equipment manufacturer for use with walk-behind snowblowers. This is the main deck belt that drives the augers, over time it may wear out and stretch eventually requiring a replacement. Make sure to clean the pulleys before installing the new b...Read moreelt to ensure top performance and longevity with your new belt. This high-quality v-belt is made of durable rubber material and it is sold individually.

This is a genuine Yard Machines, MTD and Troy-Bilt part for use with Snow Blowers. The recoil starter assembly houses the rope and the spring-loaded gear that starts the engine. This part is sold individually. The most common reason for replacing the recoil starter is if the rope or spring breaks, causing the engine to not start. The tool...Read more that you will need to replace the recoil starter assembly is a 3/8" socket and a 5/16" socket.

This flange bolt is a genuine OEM replacement fastener designed for use in a variety of lawn and outdoor equipment. It is 10mm long, with a diameter of 6mm, and a 1-millimeter thread pitch. It has a strength rating of 8.8 and it is used to secure various components together and ensure their stability during operation. The bolt has a hexag...Read moreonal-shaped head for easy gripping and a protruding outer rim at its base known as a flange. This flange helps to evenly distribute the load of the fastener and prevent damage to the mounting surface during tightening. It is recommended to inspect all the bolts on your equipment and if you note that any of them are cracked, corroded or the threads are worn down, you will need to replace them. Use a wrench to unthread the faulty bolts and install the new bolts into the mounting holes. Be careful not to overtighten your bolt(s) as you may risk damaging the equipment and stripping the bolt threads. Each bolt is sold individually.

This is an authentic manufacturer made replacement part which is specially designed for use with Yard Machines, MTD, Troy-Blit, and Yard-Man snowblowers. When the recoil starter handle is pulled, the starter rope rotates the starter pulley causing the engine turn fast enough to generate a spark to ignite the fuel in the chainsaw. This par...Read moret is made of durable plastic and is sold individually. For instillation you will need a screw driver and a pair of needle nose pliers.

This replacement part is an authentic manufacturer-sourced component which is specially designed for use with snowthrowers. It is mounted to the lower chute to help direct the snow away from the unit. This part is made of high-quality plastic material and it is sold individually, please note the hardware to secure it is sold separately.