31A-050-711 (2010) Troy-Bilt Snow Blower - Overview

This key a genuine manufacturer-sourced replacement part for use with outdoor equipment. They key is inserted into the ignition to power on the equipment. It is made of durable plastic and is approximately 1 inch wide and 2.25 inches long. You will need a replacement key if yours is broken or lost. Each key is sold individually.

This OEM spring bell washer is a small, circular piece of metal that is shaped like a cone and has an inside diameter of 1/4 of an inch. It is also called a Belleville washer or a disc spring, and it is used in lawn equipment to help spread out pressure and absorb shock between parts. If a washer is broken, it may look flattened or distor...Read moreted, and your machine may make unusual vibrations or noises. If you do not replace a damaged spring bell washer, your machine will wear out faster because there will be nothing to cushion its parts. To remove a washer, you can use pliers or a flathead screwdriver to pry it from your machine. If it is difficult to remove, you can use a penetrating oil to loosen it first. To make sure you purchase the correct number of washers, which are sold separately, check your user guide to see where they are needed in your machine.

This is a genuine manufacturer approved replacement spark plug. It is an authentic OEM part commonly used on a variety of lawn and garden equipment. The purpose of a spark plug is to deliver electricity from an ignition system to the combustion chamber. Over time spark plugs tend to wear out, get dirty or fouled requiring replacement. Inc...Read moreludes one (1) spark plug per order. You would need a spark plug wrench or a socket wrench to install the spark plug. Please note, after replacing it, you should gap the spark plug according to the owners manual of the outdoor product you have.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with snowblowers from Troy-Bilt and MTD. The hard rubber paddle attaches to the auger weldment and the paddle bracket. This item is used to scrape and collect snow to be discharged through the chute. The paddle is sold individually, and a wrench, socket set, and screwdriver may be needed to install this item.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman lawn mowers. The key is used to turn the ignition switch to start the lawnmower. This part is made of durable plastic and is sold individually. There are no tools required for this repair, simply place the key in the ignition to use.