This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to disl...Read moreodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft.
If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part.
Customers rate the difficulty of this repair as Medium.
This Flat Washer is made of durable gold-colored metal and is an authentic OEM part. It is used to spread the load under a bolt or nut and is sold individually.
This part will need to be replaced if you notice any signs of cupping, corrosion, or other damage.
Customers rate this repair as Easy.
It is an authentic OEM part which is made for use with lawn and garden equipment. This is the special self-tap screw that helps to secure components together. If the hardware is missing or is damaged, this will provide an identical replacement for the original hardware that was installed on a new unit. This high-quality screw is made of d...Read moreurable metal and is sold as an individual item. Refer to the owners manual and the appropriate diagrams for your model to ensure the proper replacement procedure. A wrench will be needed to secure and remove this hex washer head self-tap screw.
This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually.
This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.
This OEM spring bell washer is a small, circular piece of metal that is shaped like a cone and has an inside diameter of 1/4 of an inch. It is also called a Belleville washer or a disc spring, and it is used in lawn equipment to help spread out pressure and absorb shock between parts. If a washer is broken, it may look flattened or distor...Read moreted, and your machine may make unusual vibrations or noises. If you do not replace a damaged spring bell washer, your machine will wear out faster because there will be nothing to cushion its parts. To remove a washer, you can use pliers or a flathead screwdriver to pry it from your machine. If it is difficult to remove, you can use a penetrating oil to loosen it first. To make sure you purchase the correct number of washers, which are sold separately, check your user guide to see where they are needed in your machine.
This is an OEM part sourced directly from the manufacturer. The hex cap screw is designed for use in snowblowers and tillers from MTD, Ryobi, Troy-Bilt, Bolens, and Yard Man. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the ...Read moremachine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this part. This item is sold individually.
This is a genuine replacement part sourced from the original manufacturer for use with lawn and garden power equipment. The truss machine screw is used with several different types of machines and the application of the screw can vary based on the model of equipment. This screw is sold as an individual replacement part, please see illustrated part list for the screws location and usage.