This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear.
The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part ...Read moreof proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages.
If they are not functioning, these parts will fail in their functio...Read moren of supplying fuel from the tank to the carburetor.
This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.
The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor.
This part is sold individually, and you wil...Read morel know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks.
Most customers rated this repair as easy.
The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.
It is an authentic manufacturer-supplied part that is specially made for use with lawn and garden equipment. This is an identical replacement for a missing or a faulty clutch spring that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardwar...Read moree. Keep in mind this high-quality clutch spring is made of durable metal and is sold in a pack of two.
This is a genuine OEM replacement part. it is sold individually. The Bump Head Knob Assembly is the part of the trimmer that you bump on the ground to advance the cutting line from the spool. Because of the abuse this part gets, it is advisable to order an extra one so you have on on hand. LEFT HAND THREADED
This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for replacing the carburetor mount gasket is if there is oil leaking from the crankcase, the crankcase gasket is missing or damaged or any time the ...Read morecrankcase cover is removed. This part is sold individually. The tools that you will need to replace the carburetor mount gasket is a receptacle for draining fuel, Phillip's / Torx drivers, long-nosed pliers and a razor blade.
This is a high quality OEM supplied replacement hardware that is specially produced for use with lawn and garden equipment. It is a standard hardware that has multiple uses depending on the unit, please make sure to check appropriate diagrams for correct location and use of this screw. Please note one durable metal torx screw is included per order.
The Clutch Drum is a silver, metal part used to transmit power from the engine to the drive shaft. Installation is rated "Medium" difficult and will require a screwdriver, wrench set, and torx wrenches. This part attaches to the clutch assembly. If broken, the clutch will slip and you will lose drive power. If this happens, the part must be replaced.
This genuine OEM sourced item is specially designed for use with gas powered lawn and garden equipment. This rope is part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.
This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman trimmers. The trigger allows you to control engine speed, which in turn permits you to safely control the speed of the trimmer line. This part is made of plastic and is sold individually. For installation, you will need a screwdriver and a pair of needle nose pliers to aid you.
This is an original replacement part manufactured for use with trimmers. This coated steel blade is used to get more use out of trimmers. The strong blade is used to cut tall grass and brush when clearing an area. The blade is sold individually.