This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this part may break due to wear, and you will know it is broken because it will completely stop functioning.
A troubleshooting tip is to tap t...Read morehe part on theg round to see if the cutting line advances. This is an easy repair to make, and does not require any tools. You will need to look for the bump head attachment point on the bottom of the cutting head assembly.
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
This head assembly is an OEM direct from Craftsman for trimmers. This assembly houses the cutting line and connects to the drive shaft. This head assembly includes one head cap, two push nuts, one washer, and one housing head. You will need pliers to replace this head assembly. This assembly is made of plastic and metal components.
Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose is to keep pressure on the Bump Head Knob Assembly.
This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.
This is an authentic Craftsman replacement part manufactured for use with trimmers. The head cap protects the line fitting and housing from wear due to contact with the ground. This special head cap is available as an individual replacement part.
This part helps to keep grass cuttings from flying around and it keeps the trimmer line in the safe zone for user. It is an authentic manufacturer sourced replacement part that is designed for use with handheld trimmers. This part is made from durable plastic and it is sold individually. This is a complete assembly which includes a plastic shield, line cutter blade and the hardware to secure the shield assembly.
The lower drive shaft housing has been OEM sourced to ensure a high level of quality. This item is intended to be used with trimmers from MTD, Troy-Bilt, Yard-Man, and Cub Cadet. The lower drive shaft is used to link the upper shaft with the cutting head assembly. This part will include the housing and the inner drive shaft and it is pre-assembled. This item is priced as a single part.
This is an authentic replacement part sourced from the original manufacturer for use with trimmers made by Craftsman. This part goes inside the trimmer head and spins to cut grass and weeds. This part is made of durable plastic and sold individually.
The line trimmer gearbox attaches to the housing. This item is available as an individual replacement part. This is an OEM replacement part for use in Craftsman trimmers. A screwdriver may be needed during the replacement of this item. It may become broken and will need to be replaced.