The pawl assembly is a complete OEM kit that includes the two plastic pawls, the two springs, and the metal housing. Installation is rated "Medium" difficulty and requires a screwdriver and socket set. This part houses the pawls that will grap onto the flywheel when the rope is pulled to start the engine. This part attaches inside the rec...Read moreoil housing. If broken, You will not be able to start the engine. The rope will be loose. Inspect for damage, and replace if broken.
This item is a genuine OEM sourced replacement part that is used with trimmers from MTD and Troy-Bilt. The trimmer head is a complete part kit that includes the spring, spacers, and the housing. This item is used to mount the trimming line to the drive shaft. This item is a complete kit.
Fuel tanks are responsible for storing and supplying fuel, like gasoline, for an engine. This fuel tank assembly is designed for and compatible with various models of trimmers and includes the plastic fuel tank and fuel cap, securing screws, and 2 fuel lines. To best maintain your fuel tank, make sure to inspect the fuel filter regularly ...Read morefor any clogs that could affect equipment performance, and replace it when necessary. Over time and through aging, fuel tanks themselves can wear down and crack, or get severely clogged, leading to issues like contamination rendering the tank unsafe to use, and in need of replacement. You must drain the fuel from the tank before you replace it, and you will need a screwdriver or wrench to remove any panels and securing screws containing the tank.
Presenting the Craftsman Clutch Assembly kit ideal for your lawn and garden equipment. This assembly plays a crucial role in engaging and disengaging the drive shaft ensuring effective and efficient operation of your equipment. The kit potentially includes multiple parts -- you can refer to your parts diagram to learn about every piece in...Read morecluded in the set. Before you start with the installation of this part ensure you're working in an area with good ventilation. It's advised to drain your equipment's fuel tank and disconnect the spark plug wire prior to the repair process enhancing safety and ease of installation. Don?t forget to wear work gloves to safeguard your hands during the repair.
Presenting the Craftsman Clutch Assembly kit ideal for your lawn and garden equipment. This assembly plays a crucial role in engaging and disengaging the drive shaft ensuring effective and efficient operation of your equipment. The kit potentially includes multiple parts -- you can refer to your parts diagram to learn about every piece in...Read morecluded in the set. Before you start with the installation of this part ensure you're working in an area with good ventilation. It's advised to drain your equipment's fuel tank and disconnect the spark plug wire prior to the repair process enhancing safety and ease of installation. Don?t forget to wear work gloves to safeguard your hands during the repair.
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and...Read more tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.
This air filter is an original sourced directly from Craftsman. The filters purpose is to keep dirt, dust and other contaminants from entering the carburetor and engine. You can clean this foam filter by putting it in a clean plastic bag with a little oil and rub the oil into the filter, then remove the filter and squeeze it in a paper towel to remove the excess oil. This is an individually sold part.
This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.
This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.
This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air fuel mixture by the spark. Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual. Over tim...Read moree a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors. It is better to replace a fouled spark plug, rather then trying to clean it.
This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged even...Read moretually requiring a replacement to ensure peak performance. Keep in mind this high-quality spark plug is made of durable materials and is sold individually. Please make sure to refer to the owners manual of your model for the correct location and application of this component.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air Filter needed to be changed
5 of 8 peoplefound this instruction helpful.
Arthur from LAVONIA, GA
Really Easy
Less than 15 mins
Air filter has a tab to open cover just press the tab to remove take old filter out and replace it with new one then reinstall the cover and you're done.
Was this helpful?
Thank you for voting!
Drive shaft stop spinning
3 of 5 peoplefound this instruction helpful.
Henry N from DEERFIELD BCH, FL
Really Easy
1- 2 hours
Remove screws from cover insert New parts put everything back together making sure not damage electrical low voltage switch l.