The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leak...Read moreage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
This fuel tank assembly stores fuel and sends it to the engine on compatible trimmers, tillers, and edgers, it includes the tank, fuel cap, and fuel lines, replace it if the tank is cracked or the lines are worn and leaking, drain the fuel and let the engine cool before repair, check the equipment model before ordering.
The pawl assembly is a complete OEM kit that includes the two plastic pawls, the two springs, and the metal housing. Installation is rated "Medium" difficulty and requires a screwdriver and socket set. This part houses the pawls that will grap onto the flywheel when the rope is pulled to start the engine. This part attaches inside the rec...Read moreoil housing. If broken, You will not be able to start the engine. The rope will be loose. Inspect for damage, and replace if broken.
Fuel tanks are responsible for storing and supplying fuel, like gasoline, for an engine. This fuel tank assembly is designed for and compatible with various models of trimmers and includes the plastic fuel tank and fuel cap, securing screws, and 2 fuel lines. To best maintain your fuel tank, make sure to inspect the fuel filter regularly ...Read morefor any clogs that could affect equipment performance, and replace it when necessary. Over time and through aging, fuel tanks themselves can wear down and crack, or get severely clogged, leading to issues like contamination rendering the tank unsafe to use, and in need of replacement. You must drain the fuel from the tank before you replace it, and you will need a screwdriver or wrench to remove any panels and securing screws containing the tank.
Presenting the Craftsman Clutch Assembly kit ideal for your lawn and garden equipment. This assembly plays a crucial role in engaging and disengaging the drive shaft ensuring effective and efficient operation of your equipment. The kit potentially includes multiple parts -- you can refer to your parts diagram to learn about every piece in...Read morecluded in the set. Before you start with the installation of this part ensure you're working in an area with good ventilation. It's advised to drain your equipment's fuel tank and disconnect the spark plug wire prior to the repair process enhancing safety and ease of installation. Don?t forget to wear work gloves to safeguard your hands during the repair.
Presenting the Craftsman Clutch Assembly kit ideal for your lawn and garden equipment. This assembly plays a crucial role in engaging and disengaging the drive shaft ensuring effective and efficient operation of your equipment. The kit potentially includes multiple parts -- you can refer to your parts diagram to learn about every piece in...Read morecluded in the set. Before you start with the installation of this part ensure you're working in an area with good ventilation. It's advised to drain your equipment's fuel tank and disconnect the spark plug wire prior to the repair process enhancing safety and ease of installation. Don?t forget to wear work gloves to safeguard your hands during the repair.
This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or d...Read moreirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and...Read more tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.
This plastic throttle trigger measures 2.5-inches in length and controls the power, speed, and intensity of the motor for your lawn equipment through the throttle cable and carburetor it is attached to. Sold as an individual part without any securing hardware, this trigger, although made of durable plastic, is a high-use part that will ne...Read moreed to be replaced more often than other parts. Check the user manual for your model for exact placement and installation location of this trigger.
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.
This carburetor is supplied by the original manufacturer as a replacement part for gas trimmers. It is made up of a metal body and plastic choke lever. The carburetor is responsible for mixing air and fuel for combustion within the engine. Over time, it can fail due to various reasons such as blockage in the fuel connections, clogged jets...Read more, damaged float, a worn-out needle valve, or a faulty gasket. A faulty carburetor will result in poor idling, difficulty starting, loss of power, stalling, and misfires. Before beginning any repairs on the carburetor, drain the fuel from the fuel tank and disconnect the fuel lines. Remove the air filter assembly and disconnect all other attachments that secure the carburetor to the engine. Remove the mounting fasteners that hold the carburetor and carefully pull it off the engine. Inspect the carburetor gasket and replace it as well if it is no longer providing an adequate seal. Place the new carburetor in position and reinstall the mounting fasteners to keep it in place. Reassemble the equipment in reverse order to complete the repair.
This is an authentic manufacturer-sourced component which is specially designed for Craftsman trimmers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine, unfortunately, over time it will wear out and may get clogged eventually requiring a replacement to maintain peak performance. When replacing the...Read more filter you can open the package in comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a paper towel to remove the excess oil. Keep in mind this high-quality foam filter is sold individually. Please make sure to refer to the owners manual for the correct location and application of this component.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
One of the two fuel lines cracked and leaking
8 of 11 peoplefound this instruction helpful.
Robert from ORANGE, CA
Really Easy
30 - 60 mins
Screw drivers
Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover
Was this helpful?
Thank you for voting!
Air Filter needed to be changed
5 of 8 peoplefound this instruction helpful.
Arthur from LAVONIA, GA
Really Easy
Less than 15 mins
Air filter has a tab to open cover just press the tab to remove take old filter out and replace it with new one then reinstall the cover and you're done.
Was this helpful?
Thank you for voting!
Carburetor and Fuel Tank needed replacement
2 of 2 peoplefound this instruction helpful.
Sal from CONROE, TX
Really Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Removed and replaced both.
Y'all need to include the gasket with the replacement Carburetor before sending out to customers.