EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31674 Craftsman Trimmer - Overview

Models starting with 31674

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel Tank Assembly – Part Number: 753-06183
$21.42
In Stock
Fuel Tank Assembly
★★★★★
★★★★★
(3)
Part #753-06183
This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines are clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.
Petrol Line Assembly – Part Number: 791-682039
$26.13
In Stock
Petrol Line Assembly
★★★★★
★★★★★
(2)
Part #791-682039
This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.
Primer and Hose Assembly – Part Number: 791-683974B
$35.70
In Stock
Primer and Hose Assembly
Part #791-683974B
This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.
Trimmer Bump Head Knob – Part Number: 791-153066B
$20.88
In Stock
Trimmer Bump Head Knob
★★★★★
★★★★★
(2)
Part #791-153066B
This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this part may break due to wear, and you will know it is broken because it will completely stop functioning. A troubleshooting tip is to tap the part on theg round to see if the cutting line advances. This is an easy repair to make, and does not require any tools. You will need to look for the bump head attachment point on the bottom of the cutting head assembly.
Line, Fuel Return – Part Number: 791-181086
$11.11
Special Order
Line, Fuel Return
★★★★★
★★★★★
(2)
Part #791-181086
The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.
Line Trimmer Bump Feed Knob – Part Number: 791-181468B
No Longer Available
Line Trimmer Bump Feed Knob
★★★★★
★★★★★
(3)
Part #791-181468B
This OEM bump head knob assembly, known simply as the bump head assembly sometimes, advances the line on your trimmer in the spool. Black in color, it is made of plastic and steel and is sold individually. Tap your trimmer on the ground to see if the cutting line advances to determine if there is a problem with this part. If it will no longer feed, it is likely that this part needs to be replaced. Most of our customers rated this repair as easy. You can attach your new part to the cutting head with no special tools required to complete the repair.
Fuel Tank Asm – Part Number: 753-06250
$34.47
In Stock
Fuel Tank Asm
★★★★★
★★★★★
(1)
Part #753-06250
Fuel tanks are responsible for storing and supplying fuel, like gasoline, for an engine. This fuel tank assembly is designed for and compatible with various models of trimmers and includes the plastic fuel tank and fuel cap, securing screws, and 2 fuel lines. To best maintain your fuel tank, make sure to inspect the fuel filter regularly for any clogs that could affect equipment performance, and replace it when necessary. Over time and through aging, fuel tanks themselves can wear down and crack, or get severely clogged, leading to issues like contamination rendering the tank unsafe to use, and in need of replacement. You must drain the fuel from the tank before you replace it, and you will need a screwdriver or wrench to remove any panels and securing screws containing the tank.
Aircleaner Filter – Part Number: 753-06417
$6.40
In Stock
Aircleaner Filter
Part #753-06417
This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.
Carburetor Gasket – Part Number: 753-06253
$6.40
In Stock
Carburetor Gasket
Part #753-06253
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
Clutch Asm Small – Part Number: 753-05860
$36.65
In Stock
Clutch Asm Small
★★★★★
★★★★★
(2)
Part #753-05860
This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.
Throttle Trigger – Part Number: 753-04119
$11.75
Special Order
Throttle Trigger
Part #753-04119
This plastic throttle trigger measures 2.5-inches in length and controls the power, speed, and intensity of the motor for your lawn equipment through the throttle cable and carburetor it is attached to. Sold as an individual part without any securing hardware, this trigger, although made of durable plastic, is a high-use part that will need to be replaced more often than other parts. Check the user manual for your model for exact placement and installation location of this trigger.
Fuel Cap – Part Number: 753-06857
$12.05
Special Order
Fuel Cap
★★★★★
★★★★★
(2)
Part #753-06857
This fuel tank cap fits on top of the fuel tank in your lawn equipment. It prevents gasoline from spilling out and keeps moisture and dirt from entering the tank. If the cap is damaged, it will be visibly broken and may not fit snugly on your fuel tank. This can allow debris to enter the fuel tank, which can cause engine problems. Thus, it is important to replace a damaged cap immediately. To remove the cap from your machine, start by turning your machine off and letting it cool down. Then, twist the cap counterclockwise to loosen it before lifting the cap straight up. Please note that this OEM-certified replacement part is sold separately.

Exact Part matches for your search term

Plate, Choke – Part Number: 31674
No Longer Available
Plate, Choke
This part number matches the current model number 31674
Part #31674
Screw – Part Number: 31674
$6.40
Special Order
Screw
This part number matches the current model number 31674
Part #31674

Common Symptoms of models starting with 31674

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel line broke
13 of 16 people found this instruction helpful.
  • Erik from ROBERTSDALE, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Was this helpful?
Thank you for voting!
Top drive shaft on my craftsman wc2200 grass trimmer broke
3 of 7 people found this instruction helpful.
  • Thomas from TICKFAW, LA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Drive shaft replacement was very easy . Minimal tools were required. Just disconnect the throttle cable, mainly for easier movement of trigger handle. Then remove the guide handle and the trigger mechanism and base. Reassemble reverse order.
Was this helpful?
Thank you for voting!
Super Easy Install
3 of 7 people found this instruction helpful.
  • Michael from GLENN HEIGHTS, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The fuel tank is held in place by 2 screws. Simply take the screws off and pull off the fuel lines.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
Was this helpful?
Thank you for voting!