EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

31623 (ASTESEU) LG Washer - Overview

Diagrams for 31623

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Water Inlet Valve – Part Number: AJU75152601
$138.79
On Order
Washer Water Inlet Valve
★★★★★
★★★★★
(77)
Part #AJU75152601
This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.
Pulsator Cap – Part Number: 5006EA3009B
$47.40
In Stock
Pulsator Cap
★★★★★
★★★★★
(16)
Part #5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Pulsator Assembly – Part Number: AGZ72909711
$161.46
On Order
Pulsator Assembly
★★★★★
★★★★★
(23)
Part #AGZ72909711
This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. If the pulsator in your washer is broken, it will need replacing immediately to continue to wash and clean your clothes evenly. The cap that sits in the center of this part is sold separately.
Washer Drain Pump Assembly – Part Number: 5859EA1004P
$175.97
In Stock
Washer Drain Pump Assembly
★★★★★
★★★★★
(17)
Part #5859EA1004P
This drain pump assembly is a genuine replacement part designed for select LG and Kenmore washing machines. It plays a critical role in removing water from the washer tub during the drain cycle, ensuring efficient water evacuation and proper cycle completion. Powered by an 85-watt, 120-volt motor, the pump is typically located near the drain hose at the bottom of the appliance. A failing pump may result in water remaining in the tub, incomplete draining, or unusual grinding or knocking noises during operation. Replacing the pump restores proper drainage and helps prevent water damage or cycle interruptions. Installation should be performed with the washer unplugged and may require basic tools and moderate repair experience.
Tub-to-Pump Hose – Part Number: AEM73213001
$42.12
In Stock
Tub-to-Pump Hose
★★★★★
★★★★★
(18)
Part #AEM73213001
This is a drain hose assembly for top-load models of LG washing machines. This hose specifically is used to allow water to drain from the tub to the drain pump of the washer. This hose is made of plastic and comes with two clamps to secure it within your washer, one on each end. If you notice your washer is leaking check to make sure if this hose is cracked or damaged, because it will need to be replaced immediately. This drain hose is an OEM part that is sold individually and will require you to disassemble part of your washer to replace it.
Washer drain Hose Assembly – Part Number: AEM73732901
$47.40
In Stock
Washer drain Hose Assembly
★★★★★
★★★★★
(7)
Part #AEM73732901
This drain hose is a genuine OEM replacement part supplied by LG for use in their washing machines. It is a light gray pipe with a diameter of 1.25 inches. The drain hose is connected to the drain pump, and it is responsible for transporting water out of the washing machine after a cycle. If the drain hose is kinked, damaged, or clogged, the washer will leak, or you may find standing water in the drum at the end of the cycle. Each drain hose comes with a metal clamp for fastening.
Screw – Part Number: FAB30598601
$21.45
In Stock
Washer Switch Assembly sensor – Part Number: 6501EA1001R
$65.73
In Stock
Washer Switch Assembly sensor
★★★★★
★★★★★
(5)
Part #6501EA1001R
This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It ensures that the washer uses the appropriate amount of water for each cycle and load type. This genuine OEM assembly includes not only the switch itself but also the accompanying air dome tube.
Cap,Softener – Part Number: MBL62061501
$36.85
In Stock
Cap,Softener
★★★★★
★★★★★
(3)
Part #MBL62061501
This part is the replacement fabric softener cap for your washer. It is also known as the washer dispenser drawer insert. It is made of blue plastic and is approximately 4 1/4 inches by 2 1/4 inches. The fabric softener fits inside the dispenser drawer and holds fabric softener and bleach. The main reason to replace this cap is if it is damaged or missing. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Switch – Part Number: EBF61674802
$138.79
In Stock
Switch
★★★★★
★★★★★
(5)
Part #EBF61674802
This part is the replacement switch assembly for your top-load washer. It contains the switch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The lid switch holds lets your washer know when the door is latched, so it can begin the wash cycle. If the lid switch is damaged, it will not allow the washer to run properly. Be sure to disconnect the washer from the power and water sources before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Common Washer – Part Number: FAF30369201
$15.00
In Stock
Coupling – Part Number: MCJ61861201
$36.85
In Stock

Exact Part matches for your search term

DOOR – Part Number: 31623
$235.34
Special Order
DOOR
This part number matches the current model number 31623
Part #31623

Common Symptoms of the 31623

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
It did not drain water, cycle stops at rinse+spin.
28 of 36 people found this instruction helpful.
  • Jesus from El Paso, TX
  • Very Easy
  • 15 - 30 mins
  • Socket set, Wrench set
1-Take water off manually. 2- Take machine to back yard. 3- lay machine 45 degrees. 4- Located water bump, (rear left side). 5-removed drain black hoses with hand. 6-removed 3 screws from bump frame. 7-Taker off all unit and marked down cable position at plug. 8- installed new pump. 9- Reverse all steps. Note: I did not use new cable su pplied with the new bump, I did not want to mess around on mother board connections, I kept old wire harness which are only two cables blue and gray. It took me less than 30 minutes.
Was this helpful?
Thank you for voting!
Water continued leaking into washer after the end of cycle through the water inlet valve.
14 of 19 people found this instruction helpful.
  • Flora from MIAMI, FL
  • Very Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Did the repair Myself. Saved $ 400.00 in the process.
Was this helpful?
Thank you for voting!
Water overflow in washer basin
11 of 15 people found this instruction helpful.
  • Ed from LAKE WORTH, FL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I diagnosed by running a full wash. I watched it and when the water should have stopped it kept running. I unplugged the washer from the power and the water kept running. This told me the inlet valve was the issue and not an electronic issue. I stopped the water by closing the water valve manually. Replacing the inlet valve was very easy . Hardest part is moving the washer out of the laundry room. The videos online show very simple steps. Maybe 8 screws to remove and a couple of hoses and five electronic connectors. Take a photo of connectors before removing them to ensure you reconnect properly.
Was this helpful?
Thank you for voting!